Whirlpool refrigerator not cooling

Whirlpool refrigerator not cooling. When it comes to maintaining a Whirlpool fridge, one only needs to follow the instructions and this is true for anyone that might be using a Whirlpool fridge. But sometimes we might not know exactly how to use them properly.

If your Whirlpool fridge isn’t cooling what it should then don’t worry. We’re here to help. In this article, we will show you how to identify which parts of your product need troubleshooting in order to resolve the issue at hand.

Whirlpool refrigerator not coolingwhirlpool refrigerator not cooling 2022

Why won’t my Whirlpool refrigerator turn on? One of the most common reasons is that there’s some sort of obstruction in the condenser coils. Obstructions such as clogs, dirt, and debris are the main culprits for causing a refrigeration system failure.

Condenser coils should be checked

The condenser coils in your refrigerator can often be found at the bottom, and as a result, tend to attract all sorts of dust and debris.

Over time, this clogging material will inhibit the efficiency of your fridge’s heat circulation so when it starts to overheat, you may notice the temperature in your fridge starts to rise more quickly than usual.

But once you pull out the dust and debris that is affecting your coils, your cooling properties should come right back online making it easy to clean within just a few minutes.

If you can access your coils without unloading your entire refrigerator first, be sure to vacuum off any loose particles you see around them otherwise using a slightly soapy warm cloth dipped into several pieces of sponge can also do a good job.

Afterward, simply wipe down all residue left behind with a dry rag or brush and after you turn on the power again it’s as if nothing happened.

Faulty Evaporator Motorfaulty evaporator motor

The evaporator motor helps draw air all around the evaporator coils and circulate the air towards the freezer and refrigerator compartment.

In many refrigerators, this motor will be found in the freezer area. If your refrigerator’s motor isn’t working correctly you may notice that it doesn’t properly circulate cold air throughout your fridge.

In this case, you should inspect the motor manually. First of all, switch off your Whirlpool fridge and see if you can budge or move the motor with your hand.

If it won’t budge, the motor needs to be replaced in order to ensure better cooling and performance.

Adjusting the temperature

It’s a fact that cool temperature settings are extremely important for keeping your produce fresh in the fridge. Your refrigerator’s owner’s manual can be a great resource for determining what temperature settings yield the best results for your model and make.

When changing the temperature settings, wait at least one day before making a decision about whether you will use the new configuration or not (this applies to many appliances).

The manufacturer usually recommends using the lowest setting possible for cooling, since this tends to be the easiest way to ensure your product is chilled thoroughly.

Thermostat faultthermostat fault

If you have a Whirlpool refrigerator, it is possible that the built-in thermostat is malfunctioning. Follow these steps to determine whether your appliance’s thermostat needs to be replaced.

Rotate the control on your main panel to the highest settings and look for the clicking sound. If there isn’t one, there may be an issue with your thermostat; in this case, it should be replaced.

You can also test for continuity through a multimeter. With these simple troubleshooting steps, you can determine whether or not your appliance’s thermostat needs to be replaced and save yourself time and money.

Defective Start Capacitor

If you’re having a problem getting your fridge to cool, the first thing you should look for is any sign of wear in your fridge’s compressor unit.

If the compressor doesn’t start working and thus the cooling isn’t functioning, look for a start capacitor to check if it has been damaged. Begin by testing this wire with a multimeter set to measure resistance (ohm).

If you can’t get continuity out of it, remove the wiring and replace the entire capacitor using an appropriate screwdriver as necessary.

On the other hand, if you’ve got no professional experience replacing capacitors yourself, go ahead and hire a certified technician with experience in refrigeration repair jobs to make sure that everything goes smoothly and safely.

Thermistor issue

The thermistor regulates the airflow in the fridge to ensure it stays cool. Normally, when this component is not broken and functioning properly.

It will send temperature data to the control board and allow you to adjust the fridge’s temperature as needed. As a result.

You should check that your thermistor isn’t damaged since it could lead to improper regulation of your fridge’s temperature and even cause it to freeze if it gets too cold.

If you notice that your thermistor does not have continuity, you might have some trouble, so call a professional.

Damaged Start Relay

This component’s main job is working with the start winding and starting up the compressor so that the fan can work.

However, if there isn’t any power generated via the relay, there’s no way for the compressor to work (and thus, no cooling in your house).

Use a high-quality multimeter to ensure that you’re power is going through this relay. If it isn’t, see if another one will do or ask for help from a technician to get things up and running again.

Main control board

There is a possibility that the main control board is defective, but more than likely it is not. In addition to replacing the main control board.

You should test the other components to determine if they are faulty. In case no other component is at fault, replace the main control board.

Whirlpool refrigerator not cooling

Related Guides

Leave a Comment