Whirlpool Refrigerator Ice Dispenser Not Working. Having a Whirlpool Ice Dispenser in your refrigerator is a great investment for any household! In previous times, you would have to fill ice trays or make ice batches ahead of time.
Sometimes you could run out so having this feature on a refrigerator is better for your needs. We understand that when making an investment, one may always be concerned about the product’s longevity.
We want to assure you that if there are any problems with your Whirlpool Refrigerator Ice Dispenser, there are plenty of troubleshooting tips we can provide which should help get things running properly again.
Whirlpool Refrigerator Ice Dispenser Not Working
The dispenser will not dispense ice or water if the paddle or pad is not fully engaged. You might try selecting water or ice on the display to see whether a glass is engaging the paddle or switch (Depending on the Model).
A glass pressed against the dispenser should be sufficient to activate it.
Dispenser Actuator Problem
The dispenser actuator is held in place by a number of spring clips.
Check the dispenser assembly to see that the dispenser actuator is adequately supported if it has become unseated, reattach it with a new set of screws and nuts.
Inspect the dispenser actuator to ensure that it moves smoothly and freely around its mounting brackets if it doesn’t, remove it and lubricate its tracks.
Issues With The Auger Motor
The auger motor spins the auger blade, thus making it turn and push the ice through the dispenser chute.
If the auger motor is malfunctioning or damaged in any way, then ice won’t move forward and will instead just sit inside of your freezer or refrigerator.
One way to see if that is indeed the problem is by simply pulling out your ice bucket and turning your bucket auger by hand.
If it doesn’t budge, then this means that either your bucket auger needs replacing or even better, there might be another issue with the motor itself.
Using a multimeter to test these things is simple. Just attach one end of the device’s leads to each of the wires coming out of your motor block, make sure it’s getting power, and voila.
Malfunctioning Dispenser Switch
The switch dispenser uses a circuit in order to turn the power on, and then it automatically cuts it off.
If your problem is related to power not being cut from the dispenser, it’s probably that there was some kind of defective wiring, or else another part is not working as supposed to because there wasn’t any continuity.
So when checking for broken wires, you will have to run a wiring checkup until you figure out what was wrong with it in the first place.
Control Board For Dispensers
The dispenser control board is the one part of a vending machine that conducts the most functionality.
If this part breaks down, it’s usually more effective to replace it with a brand-new one than to fix it, as many small and large parts inside the machine’s anatomy can easily go wrong at any given time.
When one part goes out and every other component works correctly, it’s likely that said broken component is at fault.
However, if the vending machine is not functioning altogether there could be a greater problem with the control board or even possibly a wiring problem in which case replacing said failed component will be your best solution.
Auger for Ice Buckets
When the ice dispenser lever is activated, the auger motor operates and spins the auger. As it rotates, it moves ice from the internal storage area toward the dispenser chute and onto a glass.
If the auger does not move and push any ice, there may be a problem with either of these two parts. If the auger itself is broken, replace it.
If everything checks out okay but nothing happens when the lever is pressed repeatedly, you might need to replace your motor.
Solenoids For Dispensers
The dispenser solenoid is what opens the flap to release the dispensable grains accordingly, and then, later on, closes it back up to get back to normal operation.
If the flap won’t open or close, we can be fairly certain that it might be defective by using a multimeter on its continuity, as we should have a steady flow.
Then check whether or not it works when prompted and so forth. If there is an issue with any part of this process, you might need to seek out a replacement suiting your specific needs or preferences.
Whirlpool Refrigerator Ice Dispenser Not Working
Related Guides
