Whirlpool oven not heating

Whirlpool oven not heating. A Whirlpool oven, just like an old friend, can be there during both your toughest times and more relaxed moments; making sure you’ll always have a hot meal available whenever you need it.

But what if your oven isn’t heating like you think it should There are some common issues when it comes down to problems associated with the Whirlpool machinery and each one needs to be handled in a different way so as not to make things worse from the start.

Whirlpool oven not heatingwhirlpool oven not heating

We’ll try our best to help troubleshoot the most common culprits behind a Whirlpool oven not heating for everyone and fix them one by one until we find out what does the job 100%.

The oven does not receive power

Ovens that are losing their heating power can sometimes be a power source problem or a malfunctioning appliance.

Here’s what you need to do to determine if your oven isn’t getting the power it needs.

Check that the oven is properly plugged into its outlet and test the outlet with a multimeter to make sure it is delivering enough power in either 120V or 240V depending on your home’s electrical setup.

You also want to check to see if any of the fuses or breakers (in the fuse box or breaker box depending on how your home runs electricity) are not working so that you can replace them or fix them (depending on the issue) and have proper voltage delivery for when you turn on your oven.

Gas supply to the oven is not connected

Gas ovens aren’t just powered by gas. They also require a steady flow of heat to cook food.

If your non-electric oven doesn’t warm up, test the flow of gas first by turning on a heating plate that’s located under another kind of appliance.

If it functions normally, then the flow of gas is adequate to bake in your kitchen. But if the appliance doesn’t start, move your oven away from the wall or simply check if the gas supply is still active and open by calling your local gas supplier.

Whirlpool Oven Bake Element Fault

Electric ovens from Whirlpool have metal coils as heating elements. It receives electrical currents that heat the metal in the oven, which is what provides you with heat to cook food. Ideally, a properly functioning oven should glow red continuously as it provides heat.

If an electric oven overheats when you turn it on, you can check the bake element to see if it is defective. A faulty bake element may have burn marks or even be broken.

In both cases, the bake element must be replaced by a qualified individual using the correct replacement part.

Whirlpool oven igniter Defectivewhirlpool oven igniter defective

If your gas connection is intact then faulty igniters may be another reason for leaking ovens not to ignite. An igniter has two essential functions in starting your oven.

First, it must channel enough electricity to open the oven safety valve and allow natural gas or LP to flow. Second, it must get hot enough to ignite those gases as they flow into the burner chamber.

To assess yours, observe them as they try to light your burner. If an igniter glows for more than 90 seconds or doesn’t glow at all it’s too weak or has malfunctioned entirely. In either case, the igniter should be replaced as needed.

A defective relay board

Some ovens come with relay boards that help to control the flow of electricity to the heating element. If a relay is faulty, your oven won’t heat up.

If one or more of these relays are broken, you need to get rid of them and replace them with new, working parts.

Safety valves without continuity

By working with the oven igniter, the gas oven safety valve supplies gas to the burner. Without it, the oven cannot be heated. This rarely occurs, however.
First, test the more commonly defective oven components, especially the igniter, before replacing the safety valve.

Test the safety valve with a multimeter if all other heating components are functioning properly. Replace the safety valve if there is no continuity.

Temperature Control Thermostat problem

The oven thermostat senses the broiler temperature and regulates it to prevent the burning of the food. If there is an oven broiler problem, then the oven thermostat can be at fault and not set correctly.

The oven thermostat has a thin copper tube attached to a slightly thicker tube that sticks into the oven. Inside this tube is a type of hydraulic fluid.

As the temperature rises, this fluid expands once more putting pressure on a small activator inside the thermostat and shutting off the heat.

As the broiler cools, the pressure reduces and allows for cooling but also turns back on when necessary for heating again.

The oven thermostat is difficult to test and is not repairable. If this is the cause of your problem, then you will have to replace your broiler’s thermostat with a new one.

Thermal Fuse issuethermal fuse issue

If the oven gets too hot, the thermal fuse trips to shut off power to the oven. If the thermal fuse has blown, the oven will not heat.

Testing it can be done by using a multimeter to test for continuity if there’s any or look at what’s said on the manual on how one can do it themselves.

What happens if I reset the thermal fuse? – In case the fuse has blown, you won’t be able to reset it and make it work but instead, your only option is to replace it.

Whirlpool oven not heating

Related Guides

Leave a Comment