Whirlpool dryer not spinning. When you dry your clothes with Whirlpool’s dryers you spend less time and money. Unfortunately, they don’t come without their problems.
In the following article, you will learn about some of the most common issues found with whirlpool dryers as well as other brands, and how to resolve them once and for all.
Luckily, many of these issues are easy fixes, but knowing which one to go for can take some research. Here we want to help do the work for you by outlining the most common reasons why tumble dryers stop spinning or won’t start in the first place.
Whirlpool dryer not spinning
Here we will discuss some common issues and solutions for Whirlpool dryer not spinning.
Damage Idler Pulley
If the drive belt is intact but there is still an issue with your Whirlpool dryer, it may be that the idler pulley has become overly worn.
Over time and use, this part may wear more quickly than others eventually causing too much tension on the drive belt.
If this is not repaired, it can cause issues with spin cycles going through properly. It will also get in the way of other internal parts in your dryer so must be replaced as soon as possible with a new idler pulley to ensure proper function once again.
Drive Belt is Broken
One of the most common causes for a dryer not to spin is a broken belt. After repeated use, this component can become damaged.
When your Whirlpool Dryer isn’t spinning even after you clear out everything inside it and try hard to make it work manually, then there’s a good chance that its belt is broken!
Before we continue troubleshooting the product in order to determine which component may be at fault, you need to know that some problems like this can be resolved by replacing the damaged part with a new or used one. You will need some basic tools such as pliers, screwdrivers, and scissors..
Defect in Drum Bearing
The drum bearing is essentially what happens when you take a drum and hang it on a bearing system to make it move more smoothly. If you have noticed that your dryer isn’t drying very well, it’s likely due to some issues with the drum bearing inside.
Whether the problem is from heat or age, it can cause quite a few problems such as clothes not being nearly as dry as they should be by the time the job is finished.
Talk to an expert today about taking care of this important part while it’s still doing its job rather than after wearing down or getting damaged!
Drive Motor’s Fault
A Whirlpool dryer not spinning problem could also be caused by a faulty drive motor. The purpose of this part is to provide rotation for the drum, providing rotation that helps in clothes drying.
Also, your clothes come out sweaty because you may be experiencing intermittent issues with the system shutting off while cooling down after it stops tumbling.
Dryness Control Board Failure
The dryness control board in a dryer regulates the heat and drying time of the clothes being dried. The control board stops the cycle when the furnace has reached its maximum temperature or has run for its maximum duration, or it can be stopped manually by an operator.
If both settings are appropriate for your machine, checking to see if any other parts have been damaged is always a good idea before replacing anything.
And remember, every model and type of dryer is different so make sure to speak with someone who’s familiar with your brand, model, or type of dryer prior to starting any repairs.