Whirlpool Dishwasher Not Turning On

Whirlpool Dishwasher Not Turning On. When you turn on your dishwasher, you’re hoping that everything will go smoothly.

The dishwasher is an important part of your routine because without it the family would be handling dishes each day for each meal instead.

So when your dishwasher stops working correctly or stops functioning at all, it’s a good idea to get a few fast repairs done so that it can get back to providing convenience once again rather than frustration and a long time spent doing the job by hand. Of course, some problems can be difficult to solve.

If one doesn’t know where to start troubleshooting from so today we have a few things you should look into in order to get your appliance running smoothly again.

For instance, maybe the lights won’t turn on when using certain buttons on it, or maybe your dishwasher runs but then doesn’t do its job properly.

Whirlpool Dishwasher Not Turning On

whirlpool dishwasher not turning on

Check the power switch. If you are unsure how to turn it on or off correctly, ask a friend or family member for help. You can’t use a dishwasher unless you have all three levels of detergent inside. If this is your first time using it, refill the dispenser with rinse aid and detergent at least once per month after running it empty once.

In this article, we will explain how to fix a whirlpool dishwasher that won’t turn on.

Drive Motor Malfunction

A dishwasher’s drive motor is essential to the appliance’s ability to clean dishes. If the drive motor flickers or fails, it may prevent the dishwasher from cleaning dishes.

But if the drive motor isn’t working, you will typically receive an error code on your digital display screen so you can figure out what exactly is preventing the dishwasher from performing correctly.

To determine whether an issue with your dishwasher’s drive motor is causing your problem, contact our team today for trustworthy, affordable repairs that are guaranteed to get your appliance up and running smoothly again.

 Power supply problem

Open up your dishwasher and make sure it’s plugged in well. The area behind the dishwasher may seem out of sight but it’s commonplace for power cords to get tugged or tripped on, so to be safe always give that plug a good inspection just in case.

Lower down to the electrical box under your sink and turn off all circuits. This will ensure everything is turned off safely in case one happens to be in a position where a small object could flip a switch accidentally while working on appliances. After confirming nothing remains on, turn them back on one by one.

Defective Touchpad

defective touchpad

To troubleshoot the functionality of the touchpad, test each button individually.

If one or more of the buttons doesn’t function when pressed, consider replacing the touchpad.

However, some computer manufacturers sell their products with customized control panels and touchpads that cannot be replaced individually.

If you aren’t able to replace either component separately, it is recommended that you purchase a complete control panel/touchpad assembly for replacement purposes.

Thermofuse issue

The thermal has a thermal fuse that is designed to help prevent burning circuits from overheating. If the thermal fuse does its job properly.

Electricity should be prevented from reaching a malfunctioning control board that may otherwise lead to all sorts of potentially serious complications including fire and damaged equipment.

However, the thermal will not perform as intended if it isn’t working correctly which means your dishwasher is going to do nothing at all until the component has been replaced.

Faulty Door Switch

A door switch ensures that a dishwasher is turned off unless the door is closed. If the dishwasher was left on and it got damaged, it might be because there was a malfunction with its door switch.

To determine if your dishwasher door switch is faulty, use a multimeter to test the device for continuity. If there isn’t continuous connectivity between 2 points in the door switch, you need to replace it.

Central Control Board

central control board

The main control board initiates nearly all of the power to run the dishwasher.

If the input voltage is somehow shorted out, or if some part of it fails, then there might not be any electricity sent through to operate the dishwasher causing it not to start.

It’s often misdiagnosed and should be checked before replacing parts like solenoids and heating elements since these small components may be misaligned, clogged with food debris, or burned out.

Selector Switch Malfunction

The selector switch on a dishwasher is used to select different options for how you want your dishes to be washed.

Some models of dishwashers have a selector switch that has been installed in the motor circuit instead of the plate.

This means that if the selector switch were to become defective it wouldn’t necessarily stop your appliance from functioning rather, it would prevent it from starting altogether.

The contacts of the selector switches can be checked for continuity with a multimeter in order to determine whether they are defective or not in comparison with what they should actually be set at in accordance with the diagram printed in the owner’s manual.

Final Thoughts

In particular, if your Whirlpool dishwasher does not drain properly, leaks, or does not turn on, a faulty dishwasher can be frustrating.

The majority of dishwasher issues are easy to fix and do not require the machine to be completely replaced.

Some cleaning is all that’s needed. First, you must figure out if the problem is specific to your dishwasher only or if it seems to affect many other appliances as well.

A guide has been created to help you troubleshoot the most common problems with two types of Whirlpool dishwashers: those equipped with bearing motors and those equipped with direct drive motors.

Whirlpool Dishwasher Not Turning On

Related Guides

Leave a Comment