What causes air in water pipes with a well

What causes air in water pipes with a well. When you turn on a faucet and the water flows in short spurts, sputters, and splashes intermittently, it means that there is air in your water line.

A well water system might have air in its pipes which can cause a number of issues including low pressure or the disruption of flow altogether.

If you experience problems with your plumbing system like this one day after the other, we recommend calling in a plumber immediately because you might have a leak somewhere in your line.

What causes air in water pipes with a well

what causes air in water pipes with a well

Leaks and malfunctions in piping can have many different causes.

It’s crucial for the local team working with your public water system to be able to determine what is causing leaks, as it also affects water usage.

Small air pockets may form during heating periods and a good pump has been designed to pump out air pockets safely.

Shut off your main water supply

There should be a button on your sprinkler system that allows you to temporarily shut off water flow to the system.

This is essential because without pressing this button, you’re just wasting your time with everything else.

A lot of times these buttons look circular and are made from metal similar to what you would use on a garden hose.

If you can’t locate your main water valve or it just won’t budge no matter how hard you grab hold of it, do not force it.

There might be a crack somewhere in the line that needs to be fixed by a professional.

Open all faucets

To relieve yourself of any clogged pipes in your residence, you need to ensure that every one of the water faucets within your home or building is open. While you do this, remember not to turn on the faucets at full strength.

You only want to apply enough force to allow air to escape from each of your pipe structures.

To begin with, take care of the faucet that’s furthest when it comes down to where your main water supply lines enter into your property and then work your way back to the front door location.

Turn on the main water supply again

turn on the main water supply again

Once all your water sources have run dry, it’s time to turn your main water supply back on.

If a trickle of water starts flowing again, you should keep it running for about 10-15 minutes before turning the faucet off again.

But if you don’t hear any running water at all, then check the valve and twist it a little further until you begin hearing a steady stream coming from the tap that lasts for 5-10 minutes without stopping or slowing down unless you turn the faucet off yourself.

Once you do hear this sound (and only then) try your other taps and flush both toilets while making sure that the noise coming from your pipes has disappeared as well.

Then turn off each faucet in the correct order

Just as you turn your faucets on in a specific order, you need to turn them off in the reverse of that same order. Start with the faucet furthest from your water supply valve or tank and work your way back.

You should end up turning off the last faucet closest to where the water first comes out of your main water supply pipe or tank. Once you finish that step, there shouldn’t be any more noise from your plumbing system.

If it continues, however, try doing this again every time you hear that banging noise.

This is most likely to indicate your pipes have been struck by a hammer due to fast-moving water instead of slow-moving water escaping out of an open tap (which in some cases can mean air has managed to make its way into your system).

The last case scenario is pretty serious and will require a professional’s opinion we hope this doesn’t prove necessary.

How do you get rid of air in water pipes?

Turn on the cold water to your sink and let it run for a moment. Be sure to check that the spigot where the hose connects is turned off as well or you might get some flooding.

Next, start to turn on all faucets in the house, starting with the lowest faucet first so that the hot or cold water can release any built-up air pressure.

By doing this maneuver little by little, counting from one faucet to the next, you won’t feel the full force of water bursting out.

Is it bad to have air in your water pipes?

Running water in a home’s plumbing system will not cause air to enter the pipes. If the pressure is too high when a faucet is quickly turned off, it forces the water backward.

Excess water pressure behind a faucet can be dangerous and may cause problems with the plumbing when left unchecked.

Related Guides

Leave a Comment