Washer Won’t Drain. It’s usually because there is something wrong with either the pump or the hoses.
To find out what is wrong with your washer, you’ll need to access the insides of the machine and check for dents or damage as well as blockages.
Once you’ve checked your machine and ensured that there is nothing preventing water from discharging, you can then clear out any obstructions with a hose clamp before replacing any damaged parts.
Washer Won’t Drain
There are many reasons as to why your washing machine won’t drain.
Some of the most common culprits may include a clogged drain hose or even a pump that’s not functioning properly.
Some models may have issues with the lid switch or broken belt, while others may experience problems due to a jammed hose.
This article describes how to clean a washing machine that won’t drain.
Clogged Drain Hoses
A clog in the hose connected to your washer is most common at the end where it meets up with the standpipe, but they can happen anywhere along the line.
After disconnecting your hose from the back of your washer, you can look through one end through a space to see if you can see clear through to the other.
If you’ve noticed a clog somewhere in this area, you’ll need something wide enough that can help dislodge it.
If a clog will not come loose, it’s important to change out the entire length of the hose so there are no other issues further down along its path from here on out.
It’s also a good time for an overall check of your standpipe by poking some space around it with an object as well since many times clogs are due to general buildup or lack of good cleanliness both problems easily solved.
Washer water removal
If you have already tried the steps in the Troubleshooting section above and are still experiencing leaking water, it means that there is likely a deeper clog causing your problem.
This could be anything from moldy or mildew to soap scum. Start by unplugging your washer if you have not already.
If you do have a wet/dry shop vac that allows for water suction, use it now to drain your machine of water completely.
The best way to do this would be from the floor drain in your house but if you don’t have access to one then make sure you get an approved bucket for maximum spillage to avoid damaging any floors or carpets as you bail out the dirty water.
If there is more cleaning of your washer left to be done than just draining it.
Problem with pump filter
The pump filter helps to eliminate unwanted objects from clogging the drain hose.
Small objects, such as buttons, coins, and other items of clothing can cause a lot of damage to your laundry machine.
That is why you need to make sure that the pump filter does not become clogged.
When the filter becomes full of lint build-up, it can cause lint to
distribute throughout the garment in which case you have to clean both the filter and all of your clothes too because they might get ruined otherwise.
Find out what methods you can use to clean out your pump filter by referring to your user manual first so you don’t hurt yourself or void your warranty in any way.
Switches and motors for door locks
The door lock makes sure the washer’s door is securely fastened shut during operation. Once the washer begins operating, it will not stop until the cycle is complete and then safely shuts off.
If the washer has a defective door lock, it might not turn on, or in some cases might continue to run its cycle without reading any signals from its controls.
Inspecting the door lock for deficiencies using your eyes and hands can help strengthen your discrimination.
If you discover that the door’s dimensions are off-kilter or out of order completely replace this part with a new one.
Make sure you can count on your multi-meter to scan those electronic signals to clean the house.
Faulty Drain Pump
Sometimes, small objects or even pieces of clothing can get stuck at the bottom of a washing machine.
To determine if this might be causing any problems, you should
remove the washing machine’s drain pump and check for any obstructions that might be inhibiting the pump from running smoothly.
If everything appears to be clear, you still notice no difference in operation.
it means that your drain pump probably needs to be replaced entirely with a new one for full functionality.
Coin Trap Error
A lot of washers come with coin neighbors that can immerge any foreign object trying to wash down the drain. The internet will complain if coin tissues start to accrue in these things.
If they do, they can clog up the gunny and then it doesn’t matter how much you know about the washer you own; it won’t drain properly when there’s stuff in its lint trap.
If this is a problem, you need to remove any dust or dirt from your washer’s lint sieve and rinse them out thoroughly before trying again regardless of what some coworkers might say.
Defective Water Pump Belt
Older washing machines have water pump belts. The belts are owned by the washer and not the owner,
which means that if the belt breaks or wears out during operation, it will not drain but rather start running water.
If you notice that water is leaking from your machine or it is leaking behind your machine causing damage to the floorboards,
then you might want to check these belts to make sure they are in good condition so they don’t cause further problems.
Washer Won’t Drain
Related Guides
