Samsung Washer Won’t Start

Samsung Washer Won’t Start. A washer that won’t start or turn on can be a big problem when laundry is piling up. The good news is that any household with a washing machine should have the DIY skills they need to get their appliance working again.

Not have to send it off to the repair shop or call in help from professionals. If your washer is not turning on, but you don’t need the full repair guide below, check out these troubleshooting tips to fix a washer that won’t start.

Samsung Washer Won’t Start

samsung washer won't start

Samsung Washer Won’t Start. After checking if the outlet has power and the washer isn’t turning, it might be that the main power cord of your washing machine is the root cause. If the cord turns out to be faulty, you can either get a new one or just buy a washing machine that doesn’t need a cord like this one:

A Samsung washer won’t start here are some problems we discuss.

Fuse On-Line Blown

Samsung washing machines have a fuse as part of their electrical system. The thermal fuse is designed to protect it from fire and electrical shock.

Fuses are usually found in the circuit board, but you may find them in various other components as well. Samsung washing machine fuses are most likely to be found in the control panel or front panel glass assembly.

If you need to replace one yourself for some reason. You should test each fuse with a multimeter for continuity; if it has blown, you’ll need to get a replacement.

Washer Power

Be sure to double-check the plug for your washing machine. If it’s not plugged in all the way, the washing machine will not have power.

As well, you need to make sure that the main switch in your fuse box is turned on in order to run power to your washing machine.

This may seem like a simple task, but sometimes the most straightforward of things can easily be overlooked in this modern world.

Issue Of The Timer

The timer is frequently misdiagnosed. Your washing machine utilizes three different timers that require the removal of the washer’s control panel.

First, check all of the more commonly defective parts which include: a fuse and components of the water level switch located in the lower right-hand corner of the timer housing.

With any faulty components replaced, use a multimeter to test the timer for continuity. Finally, attach a wire leading to an appliance and another wire leading back to itself and twist one end 90 degrees so it touches itself – if this causes your washer to operate, then your timer is defective.

Faulty Main Control Board

The main control board is rarely the culprit for the particular symptom being described.

Before replacing the main control board, it would be helpful to first check all of the more commonly defective parts for misoperation and malfunction, such as the relay, if a problem appears only intermittently.

Malfunctioning Power Cable

malfunctioning power cable

Before you start diagnosing your machine, make sure that the power cord is properly connected to an electrical outlet.

If the washer isn’t booting up, there’s still a chance that you’ll save yourself a good deal of time and money if you rule out any potential issue with the power cord itself.

Once you’ve verified that the appliance is receiving power through its power cord, use a multimeter to test for continuity along the length of the cord.

If it doesn’t register any voltage on your test meter, put down this guide and order a new one right away because chances are it’s long past due.

Error With The Door Lock

The washer door lock secures the washer in place during a wash cycle. When the washer door is closed, the washer can begin operating. If the door isn’t latched shut properly, the door switch will not let the washer start a cycle.

Inspect the door lock for damage. If there’s damage or if it doesn’t latch properly, repair or replace it.

To check that a defective door lock has not failed due to an electrical malfunction, consult your washing machine’s wiring diagram and use a multimeter to test each of the switches for continuity.

Defective Thermal Fuse

If the thermal fuse blows, your washer won’t start. To test a thermal fuse for continuity, use a multimeter to check for resistance on its terminals. If there is no resistance present, the fuse is blown and you should replace it.

To look further into this issue, you need to investigate and resolve the problem that caused it to blow in the first place in order to prevent this from happening again.

Related Guides

Leave a Comment