Samsung refrigerator freezing food

Samsung refrigerator freezing food. Do you have an issue with your Samsung fridge where your food is freezing in the refrigerator.

This can be rather annoying, but luckily there are a few things that you can do to solve this problem quite easily.

It’s usually because of a few different reasons as to why your food ends up freezing. The first reason being that there is too much moisture inside your refrigerator.

When the temperature settings on the refrigerator are kept too low, then the amount of moisture in each compartment rises and eventually leads to frozen goods.

To prevent this from happening, make sure the temperature settings are correct, and place bottles of liquids inward or toward the back so they do not freeze over when left in groups on shelves with foods.

Samsung refrigerator freezing foodsamsung refrigerator freezing

Here we will discuss some common issues and solutions for Samsung refrigerator freezing food.

Food Placement Issues

An easy way to make sure that your fruits and veggies stay fresh for longer is by keeping them away from the coldest parts of your fridge. Most fruits and vegetables are very watery and have little to no fat.

That means they react differently in colder temperatures than something fatty like a nice cut of steak would.

If you take any fruit or vegetable and place it into the freezing coldness found in the back of most fridges, you risk getting food poisoning from it!

Faulty Thermistor

A thermistor is a sensor that monitors the temperature of an environment and outputs a varying electrical signal based on its findings.

In this case, the thermistor will wirelessly communicate with your refrigerator’s electronic board which will then regulate the amount of power being delivered to the compressor and evaporator fans based on readings given by the thermistor.

If there’s a problem with your thermistor, when this communication occurs it may result in your refrigerator running too frequently.

To determine if you have issues with your thermistor, check its resistance with a multimeter; a reading that varies or testing which yields no data at all means you’ll need to replace it right away!

Defective Temperature Control Thermostat

Temperature control thermostats present on refrigerators direct an electric current to the refrigerator’s compressor, fan, and cooling system.

If one of these components becomes faulty it could have an adverse effect on your appliance’s temperature.

So you’ll want to identify whether or not your thermostat is functioning the way it should be. To test if this is the case, swap between temperatures until you reach the highest setting; listen for a click sound.

If no such sound is made by the temperature control thermostat then it isn’t defective; move on and try another method to see if your thermostats are malfunctioning like m A multimeter can be used as well! If reading just doesn’t seem right replace this component.

Faulty Damper

The damper opens and closes to let the proper amount of cold air into the refrigerator compartment.

If the damper is stuck open, it will drain all of the cold air from the freezer and refrigerator compartments. Check the damper to make sure it is closed.

Problem With Main Control Board

The main control board might be defective. However, the control panel is very rarely the cause of the problem.

Before replacing the control panel, first test all of the more commonly defective components. If none of these components are defective, consider replacing the system’s main control board.

 Vents Failure

If the vents become blocked in some way the fridge will over-cool to compensate for the reduction in airflow. This could result in your food freezing and spoil as a result.

A build-up of ice and frost such as this can be caused by warm air entering the refrigerator itself, whereby moisture gathers within the unit, becomes frozen, and thus forms ice and frost.

In these circumstances, you should clear away any excess buildup of ice or frost before it ends up gathering within your fridge and potentially causing damage to electrical parts.

Related Guides