Samsung fridge is not cooling. You will have problems with Samsung refrigerators, even if you haven’t even used them yet. However, unlike other appliances, the issues you face when cleaning a fridge will vary from time to time.
The following are some of the most common reasons why a Samsung refrigerator is acting up. A failed evaporator fan motor is one of the most common reasons for a refrigerator not to cool properly.
It draws cold air into the evaporator coils. It will not provide enough cold air to the refrigerator, preventing it from cooling.
Samsung fridge is not cooling
Check to make sure the door gasket is not torn, weathered, or dirty, as this can cause gaps in the seal between the refrigerator and the door.
This could lead to warm air from within escaping, altering the temperature inside.
If you note dirty or frosted gaskets around your fridge door, clean them immediately and then allow it up to 24 hours for them to return to their optimal state at keeping food temperature stable.
Defective Start Relay
There will be times when the compressor won’t run if the start relay isn’t working. Your fridge will not be cold in these circumstances.
Check for continuity between the ‘Run’ and ‘Start’ terminals using a multimeter to determine whether the problem is with the start relay.
If your starter relay fails, your lamps may not light; however, this indicates that something else in your compressor/fridge has failed.
If you don’t measure any continuity between the ‘run’ and ‘start’ wires when testing a multi-meter to choose from, try replacing it and see if that fixes it.
Temperature control board faulty
The cooling system will not receive power and will not be able to maintain a constant temperature if there is a problem with the temperature control board.
Make sure you check all of the most frequently defective parts before you decide to replace the entire board. In some cases, it may just require a minor repair.
Either test it yourself if you’re skilled in electronics or seek assistance from your local Samsung retailer.
Thermistor failure
The thermistor in your refrigerator may be beyond repair if it isn’t working properly. In most cases, however, you may not have to replace the whole device.
To find out if this is the case, we need to check our thermostat using a multimeter. You may need some help from a professional if there are no changes in your thermostat’s resistance or if it shows no continuity.
Set Your Temperature Correctly
All of us have experienced it. Your fridge has stopped cooling properly because you accidentally bumped or pressed the temperature controls.
If you have a Samsung refrigerator, all you need to do is check your controls or display screen (or adjust the level if you didn’t already know).
The temperature in your fridge should be set to 38° Fahrenheit, and the temperature in your freezer should be 2° Fahrenheit.
Dirty condenser coils
Condenser coils help to keep food stored in the refrigerator cool. The condenser coils are located under the refrigerator, and they work by cooling down refrigerant as it moves through them.
If the condenser coils are dirty, they won’t be able to cool down refrigerant effectively, causing the refrigerator to require a lot more energy in order to maintain proper temperatures.
The hotter an appliance is running, the harder it must work to stay running properly; so if the coils are very dirty, you may see that your appliance is no longer working efficiently or effectively. Check to see whether or not your condenser coils need cleaning.
Faulty Evaporator Fan Motor
Your refrigerator has a cooling system (often referred to as a cooling mechanism) that takes warm air and moves it over a set of cool coils essentially transferring the heat to these coils.
It then compresses this air which is what allows your refrigerator doors to safely store food without rotting or giving off foul odors. If the fan motor isn’t working, your fridge will still function but slowly warm-up and thus no longer remain cold.
Before replacing the motor, however, you may want to test your cooling motor for continuity using a multimeter. This can also help you determine if the motor itself is just making noise not actually functioning.
If everything checks out electrically with the motor, however, then you know that your refrigerator needs a new cooler motor, and replacing it should solve any cooling problems you have.
Defective Compressor
The compressor is like a baker’s apprentice. It is an important piece of the refrigerator, and it makes sure the ingredients are mixed well together while they’re being concocted. When the compressor doesn’t work well, the ingredients won’t turn out just right.
Before replacing your compressor entirely, take some time to check on more common problems first. If you have looked at all of your other mixing equipment and determined that everything else is working properly, you can then check on whether or not it could be your compressor that needs a new recipe book.
Using a multimeter to test whether there is continuity between electrical terminals will help you determine if your compressor has gone “bad,” in which case you’ll need to call in a licensed professional to fix things for you. Everything should come out tasting exceptional afterward. Samsung fridge is not cooling.
Main Control Board fault
It’s possible that the main control system is faulty, but mistakes happen. Test all the other components first before replacing the system.
You need a new eye on that board if none of the other parts are malfunctioning.
Related Guides