Samsung Dishwasher Not Draining. A Samsung dishwasher not draining can be frustrating. But don’t worry. It doesn’t mean you have to call for an expensive repairman. There are plenty of easy things to try first.
Before you do anything else, make sure there isn’t something caught in the drain pump veggies like onion skins or potato peels could jam it up, spurring water leakage.
If that doesn’t solve your problem, you should check the air gap underneath the sink, put a bucket underneath, and run the water for five minutes or so (leave the valve at the bottom closed).
If your dishwasher starts during this haul-off test, look inside the machine’s air gap section; it may be clogged with food particles. Don’t forget to check standing water inside the machine; wipe out using a sponge wrapped in a paper towel and never submerge.
Samsung Dishwasher Not Draining
If your dishwasher isn’t draining, check the sink’s drain for clogs and blockage from food, debris, or other waste.
To do this, use a hose and attach one end to the faucet or to a working drain; with the other end, you run water into the dishwasher.
If it drains then, that means it’s something wrong with your dishwasher drain hose connection.
We discuss some issues and their problems that how to fix Samsung dishwashers that won’t drain below,
Checking blockages or clogs
Clogs can occur at any point where the drain line narrows or constricts. Using a flashlight, remove the drain line from the connection at the garbage disposal and look for debris.
Remove the drain line from the Samsung dishwasher and inspect it for debris. Clear this area as well. Clean the drain line with water if it is heavily clogged with debris.
After cleaning the connections on your Samsung dishwasher as well as the garbage disposal, reconnect both lines. Look for any damaged washers. Check to see if your Samsung dishwasher has resolved the issue by running another cycle.
Deeper Issues
The problem may be more serious if you’ve tried all these solutions but still have standing water. Your dishwasher will not drain properly if any of the following parts are damaged.
It is recommended that you call a technician if you suspect one of these problems with your dishwasher, as you could void your warranty if you attempt to make these repairs yourself.
Failure Of A Pump Shaft
The spout connects to the electric motor by the motor shaft. If food debris collects in the spout, the shaft can break free of the spout impeller.
The motor will turn the shaft but not for long if no further connection is made between its bearings and impeller. It is important to remember that if one part is broken, it does not necessarily mean that replacing other parts will bring you back up to scratch.
One should only pay attention to the problem at hand so as not to fix something incorrectly or put more money into fixing something that might just grow bigger unless there are proper prerequisites for repairs first.
Defective Check Ball
The check valve is a small plastic component that is located in the drain line of your dishwasher. It’s secured to the washtub by a mounting bracket and has a hole in the center, through which clean water can pass during an active cycle.
The check valve works by preventing water from draining back into the dishwasher when it isn’t supposed to be drained. To put it another way, it prevents dirty water from backing up into the tub to mix with clean dishes.
If there is a problem with the check valve, your dishes won’t come out properly cleaned because dirty water will mix with them when they should have been rinsed off completely.
Drain Hose problem
The dishwasher is not draining completely. Inspect the drain hose for potential clogs.
Remove the drain hose from both the machine and disposer, clean it thoroughly, and allow adequate time for drainage after completing your cleaning task. If necessary, replace the tube entirely.
Water Pump Belt Malfunction
The water pump belt is a device that helps take care of vital tasks. Combined, these functions ensure that your dishwasher will work as it should and continue to run smoothly.
The first thing you need to check is whether the water pump belt is rubbing against the bottom of the washer. If it looks worn or damaged, you’ll have to replace it.
Solenoid Drain Kit Issue
The drain solenoid is like the drain for your dishwasher.
Think of it as a door closing so that water can leave behind dishes clean and dry. But if something goes wrong, the door won’t shut properly.
It won’t work right. Again, think of all those dirty dishes piling up over time.
Dishwasher Connection to Sink
A dishwasher requires a high loop drain hose either to the sink or an air gap. This is there to keep you from having to call a plumber for a clog in the plumbing line.
The reason being is that if your dishwasher drains into a garbage disposal or a kitchen sink, then that water needs somewhere to go because it cannot just go directly out of the sink.
It goes back into the dishwasher, which creates a big mess inside your machine and can damage its components because food particles will clog up everything inside your machine, so it’s important not to run any machines with this type of fault.
Check underneath your sink by removing the cap and cover on your air gap. This will allow you to check for any blockages, as well as keep you from getting water damage under your sink from a broken drain hose.
Final Thoughts
If your Samsung dishwasher is not draining, it could be the result of debris buildup in the drainage pipes or clogging of your drain pump.
A build-up can occur due to improper installation by the installer, which you should contact for service if this is the case. Another reason might be something blocking one of the holes in your sink’s strainer basket that prevents water from properly flowing out.
To minimize these issues, we recommend you clean your filters regularly to keep them clear of grease buildup and use a hose to remove any obstruction in one of the holes when possible.
Samsung Dishwasher Not Draining
Related Guides
