Rheem air conditioners troubleshooting. When your air conditioner goes out, it can be a major headache.
Not only will you have to sweat it out until you can get it fixed, but if the malfunction occurred due to a specific problem that can be resolved on your end and you do nothing about it – there’s a chance that you’ll have to pay for the repair anyway.
By following some simple troubleshooting steps before calling in a technician, however, you can save yourself time and money.
Rheem air conditioners troubleshooting
Here we will discuss some important issues and solutions for Rheem air conditioners troubleshooting.
Rheem Air conditioner’s fan problems
A dual shaft fan motor might not be spinning when it should, or the <strong>heat</strong> outside is making it overheat. The fan part of the engine has bearings that can loosen or bind from all this trouble.
To get your AC unit cooling again, wiggle the motor shaft to see if it’s loose enough to spin all by itself. If so, you need a new engine.
If the fan does not work, you can test your cord for power and then check for a fuse. If there’s any problem at all with your wiring or fuses, we can take care of it by replacing it free of charge as part of our Fan Motor Replacement Guarantee!
The relay board provides voltage to many components of the air conditioner, including the fan motor. If the relay board isn’t working properly, the fan might not run.
Before replacing the relay board, make sure you check more commonly defective parts—particularly the fan motor capacitor and the fan motor itself.
If you are certain that all of the other components are working properly, replace the relay board.
Rheem Air conditioner Create noise
When the compressor is making an abnormal amount of noise, do not replace it. The best way to fix this problem is to have a licensed professional inspect and repair the compressor.
You may wish to have a new one installed, but only have a certified automotive engineer change it.
Dual shaft motors have bearings that are usually pre-greased, but after some time this grease will wear off and the motor will make a squealing sound. When this happens, you should purchase a new motor to replace the old one.
Rheem Air conditioner’s turn off issue
Dirty condenser coils will lead to inefficient air conditioning, so clean them regularly. Condenser coils should be cleaned once a month or whenever you notice your AC running frequently or inefficiently.
Keeping the condenser coils clean of dirt and debris is easy; simply vacuum the dirty area using your vacuum cleaner fitted with a brush attachment.
Do not use abrasives to clean the condenser coils, as this might damage the coil fins. Vacuum both sides of the coils thoroughly from top to bottom in order to ensure that all dust and debris are removed efficiently.
The thermostat works like a switch. It maintains the heat in the room by continuing to turn on and off the furnace whenever it reaches its set temperature.
With the help of a multimeter, you can learn if the thermostat has continuity if it is switched to “on.”
Rheem Air conditioner not cooling efficiently
If your central A/C unit’s filter is clogged, air cannot flow through properly and this greatly reduces your cooling capacity.
Filters should be cleaned regularly to ensure proper airflow and you should replace the filter if cleaning it proves difficult or seems impossible.
The main reason that filters become so clogged is that they collect dust and debris – sometimes looking more like a full bin of sand instead of an actual filter that’s supposed to clean the air!
If the condenser coils are dirty, they won’t be able to expel heat as efficiently which means it’ll either take longer for your air conditioner to cool your home down, or the unit won’t be able to maintain a steady temperature at all.
If you notice that condenser coils are becoming choked with dirt and grime, it’s important to call in a professional rather than simply cleaning them yourself.
Rheem Air conditioner’s faulty compressor
The temperature control unit controls power to the compressor and cooling fan. If the unit is defective the compressor and/or cooling fan will not run even if power has been restored.
Often, a defective temperature control unit is misdiagnosed as a bad component such as a resistor, capacitor, thermistor, or contactor.
Before replacing a temperature control unit be sure to check all of the components in its circuit for proper operation.
The thermostat has both electrical contacts or wires and moving parts that can go bad and make your air conditioner stop cooling properly but still turn on.