Maytag Washer Won’t Spin. Nothing is more frustrating than when we aren’t able to do those laundry chores that need to be finished and now it’s taking its toll on our stress levels.
It’s useful to know how to fix these kinds of simple issues ourselves as the solution may be easy.
Contact a professional in the case that you require HVAC repair services however if too much time or money has been spent waiting for professionals who can’t solve your problem or at least get you on the right track towards fixing it.
Maytag Washer Won’t Spin
Maytag washer won’t spin. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. If it’s overloaded, the motor coupling will fail in order to protect both motor and transmission.
Here are some tips you can try on your own to figure out why your Maytag washer won’t spin.
Drive Motor Trouble
The motor may be defective. Typically, however, the motor is not to blame for this symptom. Before replacing the motor, inspect all of the other potential problem components first.
If none of them are to blame, it’s time to replace the motor. To determine whether or not a new motor is necessary, start by making sure that power is reaching the motor.
If your machine just hums and does not spin at all, if it’s noisy or will not freely rotate, then you need a replacement part precise to your model and make of washing machine.
Tubing Bearing Issue
The tub bearing assembly is mounted in the middle of the outer tube of the washer. The bearing keeps the inner tub spinning smoothly.
If the bearing freezes up and locks, it can prevent another part inside of your washer from turning or cause a loud rumbling noise.
Replacing the outer tub and its bearing as one assembly is best when it comes to replacing this part since they are typically attached together so there isn’t a need to replace just one if only one is defective.
Pulley Drive Error
Pulley drive components connect to a washer drum, which spins the washing and spinning mechanisms. If your pulley drive is worn out you might be able to resolve the issue by replacing the pulley.
Inspect the old pulley for any fraying or deformities and look for signs of damage after you pull it off of its intended spot on your appliance.
Although we can’t guarantee that removing the old pulley will improve maintenance, it’s a good idea to try because it might not be causing friction with other parts, which could worsen as time passes even if there isn’t an obvious problem yet.
Clutch Defect
The clutch assembly is a piece of important machinery that helps retain the proper speed in operation.
If the clutch isn’t working properly, it may cause the entire system to malfunction. This may prevent the tub from spinning. It should be replaced immediately if it isn’t operational.
Faulty Basket Drive
The basket drive is the part of an automatic transmission that engages and disengages with the transmission.
If your car’s automatic transmission does not turn over at all, or it is slow to engage and shift, you should check to see.
If the inner tub or basket drive needs replacing. If you suspect that either part is worn.
You’ll want to inspect them for cracks or damage before throwing a new belt on top of the new basket drive because this is usually the cause of these types of problems when it comes to wear and tear.
Rotor Assembly Failure
The outer tube of the washing machine rotates around the stationary inner tub in order to agitate and wash clothing.
If the rotor is defective or if any part is damaged, it may not spin at all or it may turn too easily and not agitate the clothing properly, sharing some similarities with an improper-functioning transmission in your Washing Machine.
To determine if the rotor is worn or damaged beyond repair, inspect it for defects. If you notice anything wrong, replace it with a new one from a well-known supplier that sells quality washing machine parts.
Motor Coupler
A motor coupling is part of a washer’s transmission and it connects the motor to the transmission.
If your washer is overloaded, the transmission may get damaged if not for the motor coupling that acts as a shock absorber.
This can also happen from normal wear and tear so if you notice any damage or abnormalities in the motor coupling, make sure to contact an appliance repair specialist for advice.
Transmission Problem
There are many parts in a washing machine that could fail. They may fail without warning, too. But if the transmission is not functioning properly.
It’s probably not the reason behind your machine not spinning anymore. Check its other parts like the motor or the timer instead before replacing the transmission unit.
Maytag Washer Won’t Spin
Related Guides
