Maytag washer off balance

Maytag washer off balance. In time, the constant vibration of a washing machine causes the washer to become out of balance.

It is easy to balance Maytag’s washers because they come with self-balancing feet on the rear.

Then, lift the rear legs of the washer off of the floor to release them after you have adjusted the front legs. It automatically adjusts the rear legs to the front when you lower the chair.

Maytag washer off balance

maytag washer off balance

A poorly balanced load can cause damage to washing machines, be it the washer or other parts of the machine.

These vibrations caused by spinning imbalance can result in reduced longevity.

Poor performance and even potentially cause catastrophic failure. Everything can have a variety of causes.

The right solution varies depending on many factors such as the type of damage or failure, root cause, and loads that may interfere with proper spin balance.

We will discuss the following issues in detail and find solutions.

Problems with Leveling Legs

Washer vibration can be caused by a machine not being properly leveled. To make sure a washer is a level, use a carpenter’s level on the top of the washer.

If any legs are off and not in contact with the floor, they should be adjusted until they make firm contact with the floor.

It may be necessary to tighten the locknuts that hold these adjustable legs in place to keep them from coming loose over time.

 Broken Suspension Rods

If one or more of the suspension rods are broken, the washing machine may vibrate excessively. Check all four suspension rods for damage, and if necessary, replace any broken rods.

Replace the Shock Absorber

Washer vibration occurs if there are problems with the shock absorbers. Shock absorbers can separate or be broken and worn out so check them to see if they are in place correctly.

When you move your unit, it’s possible that the shock absorbers become dislodged or separated which means immediate replacement is a necessity.

Take out shipping materials

If your washer is new, it’s probably because someone accidentally left behind some of the packing materials or parts when assembling or installing the washer.

It is possible to determine whether this is the case by removing all of the pieces that don’t seem to be integrated into the machine itself in any way.

Top-loading washing machines typically come with three bolts and spacers which may require their own removal depending on the make and model.

Overloading should be avoided

If you’re concerned that your washer might be overloaded, check to see if the machine has any problems with a small load first by running it yourself to see how it works.

If there are no issues with just a small number of items, this indicates that the washer isn’t being properly balanced during the spin cycle due to overloading and will begin spinning out of control.

Check for laundry below the tub

The washer may not be running properly because of something getting stuck inside, like a sock or another small article of clothing that you can’t see.

If you see nothing wrong but the machine continues making noise then push a broom handle or

similar tool down into the tub during various stages of the wash and rinse cycle and hit against the sides, top, and floor to dislodge anything that could be causing the problem.

Check for any other loose items in there as well: buttons on clothing, coins, cards, etc., and remove them with your hands if you find them.

Related Guides

Leave a Comment