Maytag Microwave Display Not Working

Maytag Microwave Display Not Working. Microwave ovens are one of the most used appliances in the kitchen and are used several times a day to mostly heat food but also to cook it throughout the day.

It is because of this that you need to keep it in perfect shape to avoid any cooking mishaps. However sometimes due to frequent use, microwave displays might stop working properly.

There are many reasons why they wouldn’t work and some of these can be resolved by you but only if you know what they are so here they are.

Maytag Microwave Display Not Working

maytag microwave display not working

If the display board is not functioning properly, either the main control board or the display board could be the source of the fault. If the display fails to produce an image for any reason, there are a couple of touch points that you should examine.

In this article, we discuss some problems with Maytag microwaves where the display does not work.

Verify The Power Supply

Another possible reason for the microwave display not working is that the power supply is faulty.

It is possible that even though you purchased a microwave with a working display if its power supply becomes defective, you will be unable to use it.

You can find out if this is the problem by plugging an electronic appliance that does not work with your current power supply into another socket and turning it on.

This will help you find whether the power supply needs to be replaced or there’s some other problem with your microwave’s display yourself.

Microwave Display Isn’t Working

The first possible reason for your microwave display not working is the main control board. If it’s at fault, you may have either missing digits or lines on your appliance.

This problem is usually caused by a broken solder point or faulty capacitor.

If this is the case, then you can look to fix this yourself by looking inside your microwave and seeing if the broken line is easy to locate for you; if so, just fix it with a soldering iron.

It could also be helpful to get a second opinion from an experienced or professional technician who can help you determine if further repair work needs to be done on the circuit board itself.

Temperature And Monitor Fuse Check

temperature and monitor fuse check

If the microwave’s display is not working, you need to check its temperature.

You can do this by either microwaving something or looking at the appliance’s thermometer and seeing what the temperature reading is.

Next, check the monitor fuse as well. Typically, different microwave types or brands may have fuses in different spots.

If so, refer to your user guide to find where they’re located, and once found take them out and inspect the thin wire inside of them to see if it has become discolored.

Defective Display Board

The main control board or the display board might be at fault if the display doesn’t work properly.

If neither one of these boards is working properly, then the main control board will likely be the cause.

In the event that the screen goes out on a partial basis, it is more likely that the display board is the cause.

FAQs

What is the problem with my microwave’s display?

The first possible reason for the microwave display not working is a problem with the main control board.

If your microwave’s main circuit board or main control panel is faulty, then this could be your problem. It’s usually caused by missing hologram pieces or faulty capacitors.

What is the process for resetting my microwave?

A soft reset is simply turning off the microwave oven so that you can clear its program and data. To do this, you will be pressing the Off/Clear button.

Pressing and holding the Off/Clear button for approximately three seconds will also resolve Control Locked toggled on the microwave.

Maytag Microwave Display Not Working

Related Guides

Leave a Comment