Maytag dryer overheating. If you’ve owned a dryer, you must be aware of the fact that it can overheat. A lot of people may think that it is inevitable because they hope it to be so.
But, nothing is inevitable if there are enough ways to prevent something from happening and we assure you that your dryer can never get over-hot if you just pay the attention to certain details like using the device correctly.
In this write-up, we want to discuss making sure your dryer won’t break down too quickly and explore some tips on how it can be maintained in excellent working order.
Maytag dryer overheating
Many homeowners are interested in finding out whether their washing machine’s dryer has the potential to overheat. This blog post outlines some of the main ways a dryer can overheat, as well as simple methods you can take to ensure it won’t happen.
Just view these tips and tricks below to learn more about any issues at hand, whether you need help with your dryer right now or not.
Dirt and dust getting into the air hole
If the air filter inside of a dryer is too full of dust and lint, it can overload the vent shafts. This can be tough on more energy and make the appliance exhaust more heat than necessary.
The upshot: excessive drying while under too much heating power. To remedy this dilemma, removing debris from your home’s air ducts can make your appliances work longer and at a reduced cost each year.
Defective Heating Element
In a clothes dryer, the heating element is a piece of metal in the middle of the dryer’s drum. It heats the air inside the drum until it gets hotter than the surrounding room temperature.
The thermostat uses this to judge when you are done drying your clothes or when you need to turn up the heat because they are not drying properly.
If one of these elements were partially shorted out, this could produce excess heat. To check if that is what’s happening, measure whether each terminal of your heating element is connected to the ground with a multimeter – if not, then you may need to replace your element.
Air Flow Issues
Clogged or partially clogged venting systems can make drying clothes take upwards of three hours or more, so it’s important to ensure that your dryer’s pipes are cleaned and properly ventilated during your annual cleaning.
If you have gas pipes, it’s also worth noting that a majority of natural gas leaks are home-based, but all houses with gas pipes need to be checked for this leakage as well.
Faulty Blower Wheel
Blower wheels work with motorized drives to force cool air from the vent and into the dryer drum. This process relies on moving parts to function properly and can be easily disrupted by clumps of lint or similar small articles of clothing that can get caught in a dislocated sleeve when trying to pass through.
After assessing the situation, it becomes apparent that wearing sources like this must be taken seriously as they can cause your blower wheel’s flow of air to weaken giving you less control over drying times and a very hot machine.
Should your machine fail these simple tests, you will likely want to consider replacing your blower wheel as soon as possible before further damage takes place.
The felt seal needs to be replaced
Most dryers have a felt seal at the front of the drum and at the rear of the drum to prevent heat from escaping inside of it. If this feels seal is worn out or missing, that means your dryer will not get hot fast enough since that’s where a lot of heat gets stuck.
So check to see if this is causing your problem. Sometimes it is though it rarely does in this case. Before you waste your time on replacing this felt seal, check all the more commonly defective parts like see if both heating elements are working.
Check if there’s something actually caught in both rotating drums, or even check if there’s some lint in between these two components. Once you’ve determined all of these other components are working properly then you can replace that felt seal with confidence.
The thermostat does not work
The cycling thermostat cycles the heat on and off to maintain the proper air temperature. If the thermostat is defective, it may keep the heat on too long, causing the dryer to get too hot.
However, this is rarely the case. Before replacing a cycling thermostat check all of the more commonly defective parts.
After you’ve determined that all of these components are functioning properly use a multimeter to test for continuity. If the thermostat does not have continuity replace it with a new updated one.
Related Guides