Maytag dishwasher troubleshooting

Maytag dishwasher troubleshooting. Your dishwasher countertops are usually trustworthy and dependable friend that cleans your dishes without complaint. But now something is amiss.

Your dishes aren’t coming clean. If the water isn’t draining, they can become soaked and moldy over time which will cause more disruption in the form of smelliness. If your dishwasher is leaking, this can be fixed by following this guide on how to fix a dishwasher leak.

Maytag dishwasher troubleshootingmaytag dishwasher troubleshooting

Your Maytag dishwasher is usually a stellar, attentive friend who cleans your dishes without complaint, but you may be experiencing problems with it recently. Here’s how to troubleshoot common issues.

Having trouble starting a Maytag dishwasher

The door switch prevents the dishwasher from running unless the door is closed. If the door switch fails, the dishwasher will not run even when the door is closed.

To determine if the door switch has failed, use a multimeter to test it for continuity. If it does not have continuity, replace it with a new one.

The Maytag dishwasher does not clean

If the dishwasher seems to fill normally but does not get enough water in order to keep the motor running, check for a clogged or defective water inlet valve.

If this is the case, replace this part and do not attempt to clean it, because attempting to clean it can make it more likely that the valve will break altogether.

Dishwasher not drainingdishwasher not draining

Your dishwasher has different components working together to get your dishes clean. One of the parts is a motor that spins and pushes the water out through small holes in the bottom of the tub you can see.

The reason these holes exist is that otherwise all of the water would drain out through large holes at the bottom of the machine (you don’t want that to happen because it might flood your kitchen).

If you notice that your drain hose is clogged or if you can hear the pump but it isn’t moving water though, check to make sure that that pump turns on and off normally, and work with a technician to replace it if necessary.

Maytag dishwasher leaks

Look for tears, holes, or gaps in the seal that could cause a dishwasher door to leak. You will want to make sure the laundry room is well-lit while checking this.

To determine if the door seal is making full contact, try closing the dishwasher door on a dollar bill around the entire perimeter of the door.

If the dollar bill does not stick to the bottom or top of the door when you close it completely, there is likely a gap in the seal.

If there is a gap in your sealing material, check for tears and replace them as necessary.

Check for any structural damage to your dishwasher such as broken hinges along with replaced seals these things may be causing your cleaning machine to leak water from underneath rather than from around the seal at its edges.

Maytag Dishwasher makes noise

Circulation pump motor bearings eventually wear out and fail. If they are allowed to continue to run without replacement then a continuous grinding or tapping noise ensues.

It is vital that when they fail, the motor either be replaced with a new one if possible or the entire circulation pump assembly if no spares are available.

Maytag Dishwasher is not latching

Ensure that the door’s latching mechanism is in working order. If the door latch is broken, replace it. The fact of the matter is that a broken door latch should be replaced rather than attempting to repair it.

Other than replacing the door itself, there’s no remedy for a dysfunctional latch as far as re-sale purposes go; so replacing this part is one of your best options.

For assessing damage to the door hinges, you must inspect them again more thoroughly and re-check all/ bolt hardware to ensure a better grasp of what structural issues might have contributed to where you found damage in the first place.

The dishwasher won’t dry dishes

Some dishwashers use a ventilation fan to help dry dishes at the end of a wash cycle. If this ventilation fan stops working properly, it will have negative effects on your machine’s overall drying abilities.

To determine if the ventilation fan has stopped functioning, test for continuity and make sure that the motor shaft spins freely by hand.

If you do not find any issues with the motor, then it is likely that the motor itself has malfunctioned and needs to be replaced.

The Maytag dishwasher is overflowing

The water inlet valve is an electrically-controlled valve that controls the flow of water into the dishwasher. The inlet valve may open and close in a set manner, and this is accompanied by a buzzing sound.

You’ll need to shut off the power supply first before unplugging the machine otherwise, you could be greeted by an unpleasant shock.

When you’re ready to remove the old unit, use a screwdriver or other suitable tool to turn the lock on top counterclockwise up until it releases.

Once this happens, push it upwards so it detaches from its place on the backside of your old dishwasher.

Maytag dishwasher troubleshooting

Related Guides

Leave a Comment