Maytag dishwasher not draining. These dishwashers from Maytag can help you wash dishes again and again with a design that’s both attractive and functional.
They’re built to last and have undergone several tests to ensure they’ll still work perfectly even after years of washing.
They feature hidden controls at the top of the door, which keeps them out of harm’s way but doesn’t compromise their functionality.
The end-of-cycle indicator lets you know exactly where your dishes are during the entire wash cycle, so you can have peace of mind knowing they’ll reach the perfect state of cleanliness.
For those who don’t like delays or surprises, the sound control options on these machines allow you to adjust according to your own personal preference or go completely quiet if needed!
Maytag dishwasher not draining
When the dishwasher and its drainage network are no longer draining, the cause may be a clogged drainage valve. Over time, due to frequent use and regular maintenance, it can become clogged with debris.
To first attempt a solution we recommend cleaning out the drainage valve. If this doesn’t work still you may have to replace it as a last resort measure in order to get your dishwasher working again.
Here are some common guides for the Maytag dishwasher not draining.
Problems with Drain Pump
A drain pump is an amazing tool. With the proper power and setup, it can force water through any hose with precision! If you run into problems with your drain pump, check to make sure it has power coming in.
Most drain pumps run on 110 volts, so a simple replacement may be just what you need to get things moving again.
Clogged Filter
A dishwasher’s filter screens out large food particles to prevent drain clogs. Yet, over time, these particles can block the filter, and clogs may occur.
Since not all dishwashers have air gaps, any debris that’s flushed down the sink drain can also clog the filter.
Drain Valve is faulty
When a homeowner finds that the dishwasher isn’t draining all the water out of the machine, it may be caused by a clogged drain valve. As time goes on there might be some debris present in this valve, and this will most certainly cause it to clog up.
However, since these valves aren’t expensive or hard to replace at all, you could try cleaning them first with some hot water and vinegar.
If that doesn’t work and the machine is still not draining all the water out of your dishes and into the proper drainpipe system then a replacement might be in order.
Check Ball not working properly
The check ball is a small plastic ball in the check valve that prevents water from returning to the dishwasher after the dishwasher has drained.
If the check ball gets stuck, it can prevent water from draining through the check valve. If you believe this has occurred, we recommend attempting to free it.
The water pump belt might be broken
The water pump belt might be worn out or broken. However, because very few dishwashers have a water pump belt, you should search for your model number to determine if it has a water pump belt.
To access the water pump belt, remove the lower panel and look at the bottom of the motor. If the water pump belt is broken or worn, replace it.
Garbage Disposer’s problem
If the garbage disposer was installed recently, you might have missed removing the drain plug.
Garbage disposals come with a solid plug in the drain tube to prevent all those chocolates and other goodies from ending up inside your sink. When it comes to garbage disposers, one must consider two things:
Clogged Drain Hose
The drain hose is most commonly clogged at either the dishwasher or the sink drain. To fix it, you will have to remove the dishwasher tubing as well as the sink tubing and clean it out.
The best way to do this is to carefully place a bucket underneath the garbage disposer and work your way down.
You’ll know that you’ve got all clean sections of the tubes when water flows freely through them into your bucket.
Drain Solenoid Kit is not working
The drain solenoid allows the dishwasher to make it easy for you to clean various items throughout your kitchen.
The sink of your kitchen may be located in an area that is hard to get to, so any mechanism that makes getting rid of your dirty dishes easier is a big help.
Broken Impeller
The drain impeller pushes water through a hose and into the sink’s
pipes.
If the drain pump impeller doesn’t work, the machine has to be replaced.
Maytag dishwasher not draining
Related Guides
