Magic chef Microwave Troubleshooting. Microwaves are handy things to have around your home.
They come in all shapes and sizes, with all sorts of cool features though at the end of the day they’re really all meant to do one thing – that is, heat up food.
As such, you’ll find microwaves installed in most modern kitchens these days though many people tend to prefer more industrial models such as Magic Chef microwaves due to their comparatively lower costs even if they lack in a few features.
Microwave troubleshooting typically involves understanding exactly where a problem lies so as to get it corrected quickly and easily for the best results.
Magic chef Microwave Troubleshooting
Magic Chef microwaves are not the most advanced home devices one can purchase but they do offer an array of features that allow them to heat up food.
The best thing about these microwaves is that they require very little troubleshooting as compared to other brands you might come across and at a price point that makes them stand out in comparison.
Magic Chef Microwave does not work properly
Inspect the fuse: place a multimeter (an instrument used to check electrical circuits) on a continuity tester setting and examine the line fuse for breaks. If the fuse is broken beyond repair, replace it.
The circuit board and high voltage capacitor can store up to 2,000 volts of electricity even when the microwave has been unplugged or turned off.
Due to the serious risk of electric shock, never attempt to open or repair a microwave oven yourself as it is extremely dangerous and could lead to you receiving an electric shock. Only licensed technicians should ever attempt such repairs.
The Magic Chef microwave does not heat
Some microwaves provide an outlet or plug only for the microwave and not for a separate oven. A diode is needed in these circuits–not always present–as a means of correcting the voltage to prevent damage to the magnetron, which powers the oven.
If a magnetron starts to fail, one may see smoke or sparks inside the casing because of arcing between waveguides (parts that control and direct microwaves).
If the diode burns out, insert a new diode with its arrow pointing toward the wire connected to the positive terminal on top of your microwave’s circuit board.
When it is inserted correctly, it should be hard to remove. Replace yours as well if there is smoke or fire within your system.
The microwave display isn’t working
If your display board isn’t working, the main control board or display board could be at fault! If your display goes out it may be difficult to know what part has failed.
However, if a few of the keys light up when you press them, there are a few things you can rule out on your own. First of all, it seems unlikely that both parts would fail at the same time, so one is probably more likely to be at fault than the other.
Microwaves are arcing or sparking
There might be a chipped paint job on the microwave interior. If the paint is chipped, there may be exposed metal and sparks. See if there are any chips in the paint on the inside of your microwave.
Touch up damaged areas with non-flammable oven paint. The rack supports might also be damaged because of this. If damaged, then redo them with microwave-safe paint using a brush or rag.
Finally, replace them if they are burnt beyond repair because they will pose a fire hazard and could damage your cooking time.
The microwave makes a lot of noise
To check if the fan motor of a microwave is defective, one can remove it from the microwave and spin the blades by hand to see if they turn freely or at all.
If the blades do not move when spun by hand, it may mean that the motor is in need of replacement.
However, you must also test this by taking a multimeter and checking to see if power is going throughout all three stages of power: plugging in as normal and off are just two ways to ensure that this area functions correctly with no surprises.
If there is no footage of electricity visiting your equipment, you know that it may be necessary to replace it entirely.
The microwave door will not open
The interior door handle engages with the door latch assembly to keep the door closed and locked during operation. You should inspect it regularly for any significant signs of wear or damage which could include cracks, bends, or fractures (for example).
Do not attempt to repair a damaged door handle by attempting to bend it back into its original shape.
Attempting this may result in weakening the integrity of the plastic, causing debris to collect inside the gear that moves when you turn the handle – again potentially resulting in even more stress on the plastic itself.
If you notice any irregularities when turning your door or a tendency for resistance you shouldn’t ignore it and just assume it will resolve itself sooner or later.
The whole purpose of these inspections is to find problems before they cause further problems and a determined effort should always be applied if you’re seeking to save your time, money, and ultimately frustration.
Related Guides