Magic Chef Freezer Not Freezing. There are many reasons why your food might be losing its taste.
If you’re noticing that the food you prepare isn’t quite as tasty or flavorful as it used to be, it could likely mean that something is wrong with how it was stored in the freezer beforehand.
Learn how to check, troubleshoot each potential freezer malfunction and take care of any situations so your food keeps tasting great.
Magic Chef Freezer Not Freezing
We discuss some problems with the magic chef freezer when it doesn’t freeze.
Thermostat For Temperature Control
Turn your thermostat up from the lowest setting. You will hear a clicking sound when it turns all the way up, which indicates that the thermostat is properly functioning.
If you do not hear this click, check your old thermostat with a multimeter to ensure it has continuity. If the electrical current doesn’t run throughout the thermostat, then you should probably replace it.
The refrigerant won’t be able to regulate and without that regulation, you can’t get cool air out of your freezer unit or your refrigerator for that matter because if refrigerant has no direction there really is no telling what might happen.
Relay Issue When Starting
After unplugging the freezer, remove the start relay from the compressor’s side. Test it with a multimeter by inserting the multimeter into its two terminal sockets to check for continuity.
If there is none, replace the relay as it is faulty. If the relay shows live, replace it as well as that means it is damaged.
Fan Motor For Evaporator
Activate your freezer’s door switch by opening the door. When the fan does not work, you should check to see if it is working as a result of some other likely issue.
There are a few scenarios that could cause this for example, either there is something directly blocking the fan or it might simply be broken hence why activating the switch isn’t enough to get it working again.
If this is happening then you need to test whether these things are contributing factors; otherwise, you should consider replacing one last component which will hopefully fix everything once and for all.
Problems With The Compressor
A compressor pumps refrigerant through evaporator and condenser coils by compressing it. If the temperature inside your freezer rises above acceptable levels, it may be time to replace your compressor.
However, it’s important to first test all of your other components to make sure they’re in working order before replacing the compressor.
Check switches on the handle, coils inside of your freezer as well as in-door dispensers. If all of these parts pass an initial check, then you might have a defective compressor. In this case, you’ll need a technician to send a new one over.
Display Board And User Control
The user control and display board might be faulty. This is rarely the case, however as control boards are often misdiagnosed before replacement.
Always confirm open electrical contacts from other components to the upper and lower levels of the machine; if all that checks out fine then it may possibly be the user controls/display board.
Fan Motor For Condenser
There’s a fan inside the condenser which draws cool air from outside the fridge over the condenser coils, making for proper refrigeration. If this motor isn’t working, not enough airflow will reach the condenser coils, and your fridge will stop cooling down sufficiently.
A quick drill-down check indicates that either there’s an obstruction preventing air from entering through the vents, or perhaps mandible blades that aren’t functioning properly.
This can be tested by ensuring that all mandible blades spin freely if they do so but don’t spin an adequate amount of air over to the coils, it might be best to replace them with new ones.
Dirty Condenser Coils
If the condenser coils are located within the walls of the freezer, they do not require cleaning. However, if the condenser coils can be accessed from behind or underneath your unit, you should clean them every six to twelve months.
If the condenser coils are dirty, they won’t be able to dissipate heat effectively, greatly reducing the cooling capacity of your freezer.
A clogged or dirty condenser coil can cause inconsistent temperatures which in turn will make your food spoil quicker causing an awful smell that must be dealt with quickly by calling a professional and getting repairs done.
Evaporator Coils Are Frosted Over
A problem with the defrosting system is a common cause: The device is responsible for melting away any frost that has accumulated on the freezer coils.
The defrost heater will turn on several times throughout the day to melt away any accumulated frost. If it won’t start, frost will continue to accumulate and eventually cover the coils preventing cold air from flowing into the unit.
In order to determine if your defrost heater is defective or has failed you must use a multimeter in order to test for continuity; if it does not have continuity then the defectively failed part should be replaced with a new one.
Related Guides
