LG washer won’t turn on. LG is a Korean brand that produces various appliances, including washers and washing machines.
Even when you manage to get your hands on one of the best LG washing machines, however, you may experience an issue that makes things harder for you.
The problem might be caused by something as simple as not having enough water in the washing machine – or perhaps a faulty digital strip display having frozen up unexpectedly.
We hope our tips will help you get back to enjoying your new laundry companion again and again!
LG washer won’t turn on
Common reasons why LG washer won’t turn on. Generally, it seems to be a problem with the main control board, an interference filter, or the power button.
Here we will discuss these issues and solutions in detail.
Faulty Thermal Fuse
If the washer has an overheating issue, you’ll need to inspect it to see if the thermal fuse has blown. If you’re able to, test the continuity of the thermal fuse.
If there is no continuity on the thermal fuse, then it should be replaced with a new one.
After replacement, investigate and find out what caused the failure of the thermal fuse within your washer.
You can also note this information down onto a memo pad so that in case it happens again, you’ll have something to reference right away!
Problem with Line Fuse
The line fuse that’s found inside your washer blows if the circuits are overloaded. This could mean that the wires, motor or drain pump have shorts and aren’t functioning correctly.
A multimeter can be used to test the continuity of the line fuse. If the fuse has no continuity, replace it.
In addition, we want to remind you to investigate and resolve whatever problem caused the fuse to blow as well.
Wires usually carry a certain amperage limit and may start getting hotter than normal under heavy
usage conditions which in turn might cause the wires to become slightly damaged due to heat damage which might eventually lead them to short out causing the fuse holder to burn out.
Door Lock problem
The door lock is part of the washer door assembly and serves as a safety precaution by preventing the washer door from opening while the washer is in operation.
Once in use, once the door locks, it prevents access to operating machinery which might prove dangerous should hands or fingers reach inside.
If either element of this mechanism fails then the lid will not secure, or close, during operation and moisture may leak out onto surrounding floors.
Checking for faulty wiring for example might be important when dealing with technical fault-finding issues like these.
Defective User Control
If you encounter any problems with user control and display board, first replace any defective button in the control panel.
If all buttons are functioning properly, but the board is still not functioning properly then try replacing the user control and display board.
Additionally, if none of the buttons are working or if the display is not working either, take out the battery from the battery pack. If there’s no power to the user control and display board tries replacing it.
Problem with Power Cord
First, check to ensure that power is getting to the outlet where you’ve plugged in your washer. If power is reaching the outlet but your washing machine isn’t responding, it might be because of a faulty power cord.
To determine if this is the case, use a multimeter function on your list of tools so that you can test it without fear of getting electrocuted.
You can then cut open the dryer’s power cord and rewire it so that the problem won’t occur again during or after its next cycle.
Defective Timer
Before replacing the timer, look for other components that might be the cause of the problem first.
To begin, consult your electrical diagram and use a multimeter to make sure there is continuity.
If everything checks out, then you’re most likely going to need to replace your timer.
Related Guides