LG Washer Leaking From Bottom. LG’s washer sometimes suffers from the issue of leaking from the bottom during the spin cycle, which means that its seal around the door has malfunctioned and needs to be repaired or replaced.
Fortunately, it is often a very easy fix to have this task completed and takes little time, as long as you know what you’re doing or hire someone who does.
The most common cause of washing machine leaks is an improperly installed front loader door seal, which can crack or wear down over time.
LG Washer Leaking From Bottom
LG washers that leak during the spin cycle are often caused by problems with the seals around the front loader door. An improperly installed washing machine door seal is a common culprit.
Tub Seal Fault
A leak can occur beneath a washing machine. This is usually due to leaking from the tub seal into the transmission, which is connected to the tub and prevents it from leaking into the drum or to other parts of the machine.
To access this component, you must first remove the top basket compartment under its spin assembly and then flip your washer upside-down if that doesn’t work.
The solution may be replacing damaged parts or adding extra seals. This can be a job best left to a professional repairman, as washing machine repairs, in general, can be somewhat laborious and require a great deal of knowledge about this type of equipment, not to mention its replacement parts.
Broken Coupler Issue
Most washing machines contain a rubber seal – or a “coupler” that sits at the bottom of the drum.
This part is generally made from rubber or plastic and has two functions to support the weight of the drum from underneath and to create a tight seal between the drum and the body of your washing machine so that it can hold more water in reserve for faster spin speeds.
Usually, this part can break, but most brands will call this a safety system because if water ever leaked out of your machine, it will go here first, spilling onto your floor around your washing machine.
However, if you see any water spillage on your floor when using your washing machine, do not panic because you may have accidental damage to this part.
Defective Drain Hose
The drain hose may be loose. The drain hose is often uncomfortably loose when the machine is pushed against a wall and/or is placed on an angled surface because the raised setup of the machine might interfere with where the hose is located, resulting in water dripping unnoticed behind it.
Tug gently on the hose to check for obstructions or poor positioning. If you notice leaking at your washer’s level immediately below or behind your unit, you should tighten your drain hose.
Drain Pump Problem
The drain pump pumps water out of the drain hose. If there is debris blocking it from pumping out fluid, or if the bearings are worn out, the pump may leak water.
The pump can be replaced if it’s leaking water – but you won’t be able to repair a drain if you have a cracked or damaged pump that is unable to function properly.
Door seal Malfunction
LG washing machines are known for their quality cleaning features, but they have also gained a reputation for being susceptible to leaks as well. The LG washing machine leaking in the spin cycle could be due to faulty seals around the front loader.
If properly installed, a front loader seal should make it so that water from the washtub flows into the drain hose and out of the washer instead of leaking onto the floor.
To address this issue, first, you’ll want to check if your front loader door’s seals are installed correctly by seeing if it is cracked or worn down prematurely by checking its rubber gaskets for tears or cracks.
LG Washer Leaking From Bottom
Related Guides