LG vacuum cleaner troubleshooting. From subway tunnels to homes, vacuum cleaners are an essential element for making light works of cleaning our homes, especially if there are children running around in a house with only carpeted floors.
The problem is that problems do come up from time to time – but those can oftentimes be fixed by troubleshooting your vacuum cleaner.
Select one of the following vacuum cleaner problems below and read more about how you can fix it yourself.
LG vacuum cleaner troubleshooting
LG vacuum cleaner is used for cleaning our homes but sometimes we face some problems with our vacuum cleaner.
In this article, we provide you with a troubleshooting guide.
Here we mentioned some common issues of the vacuum cleaners and their easy solutions.
LG Vacuum cleaner no suction
Vacuum cleaner filters trap particles as air travels through the machine. If the filter is clogged, the vacuum’s suction power will be reduced.
To fix a clogged filter, simply clean it using the manufacturer’s instructions.
The vacuum bag might be full which could keep air from flowing freely to the machine’s vents. To fix this problem, clean or replace the bag according to model recommendations for your type of vacuum cleaner.
The vacuum filter is like a sieve. It catches tiny particles that get through the vacuum’s fine mesh.
If the filter gets clogged, airflow will be constricted and your vacuum does not suck.
If you think your vacuum filter is clogged, refer to your owner’s manual for cleaning instructions. Give the wheel a spin to see if it’s stuck.
If so, there might be stuff in the way of the wheel. Clean out any obstructions from it and take a look again.
LG Vacuum cleaner motor not functioning
If the switch is defective, use a multimeter to test for continuity. If the on-off switch does not have continuity, replace it.
First, test the power switch for continuity to ensure that the motor is receiving power.
If the power switch has continuity, ensure that the blower wheel turns freely and is clear of obstructions.
If power is getting to the motor, and the motor turns freely, but it still won’t run, replace it.
Ensure that electricity is flowing to the motor first. If electricity is reaching the motor, but it’s not running, you may want to test whether or not the fan easily turns by hand since the motor alone may not be responsible for the issue.
If you suspect something else might be wrong like a motor wire shorting out due to fraying insulation, go ahead and replace the fan as needed.
LG Vacuum cleaner brush not rotating
To check the vacuum cleaner belt, twist it between your fingers and make sure it’s neither broken nor out of place. If the old belt is broken or out of alignment, switch it out with a new one.
If the brush roll is not spinning correctly, inspect it to see if there are loose hair and other debris caught up in its rollers. Remove extra lint and debris from all parts of the brush roll.
Check for any worn parts like broken pieces or bent brushes that must be replaced to make sure that the vacuum works properly again.
Ensure that the belt is in good shape and that it isn’t damaged, stretched out, or out of place. Replacing a damaged or worn-out drive belt may be necessary.
Examine the belt to determine whether it is broken, stretched out, or out of place. Replacing a broken or stretched cogged belt is the right thing to do.
Why did my vacuum cleaner suddenly stop working?
It’s a simple issue your vacuum cleaner isn’t getting the power it needs. Check that you’re plugged into a working power outlet and that any fuses and breakers haven’t tripped or been reset.
The next possible source of the problem is that there’s something catching in the vacuum, preventing it from spinning freely which will result in an overheated motor so check for any blockages that may be binding up anything.
How do I know if my vacuum motor is bad?
If you notice a strong odor from the shellac that coats the copper coil winding, it means that your motor is about to burn out.
If it’s still running for a few more minutes after the initial burning smell, shut the motor off.
Related Guides
