LG Refrigerator Ice Maker Not Working. There may be times when one of the most important features of your refrigerator stops working. This is inconvenient for a number of reasons, especially given the fact that making ice is an essential activity in today’s world.
The issue with your ice maker might be offered in many ways. It’s often expected that you can simply adjust the ice maker settings to get everything up and running again.
Finding out what exactly went wrong, as well as figuring out exactly where to draw the line between damage and disrepair, is one thing, but resetting your refrigerator’s ice maker settings is becoming a whole other ordeal than you ever imagined it would be.
LG Refrigerator Ice Maker Not Working
LG refrigerators with ice makers can be affected by many different but mostly similar problems. These are caused by temperature fluctuations (in the ice maker compartment), a faulty water inlet valve, a broken ice maker, a malfunctioned control board, or a faulty ice maker fan in the freezer section.
If your LG refrigerator’s ice maker isn’t working, here we explain how to fix it.
Water Filter Issues
An effective water filter has a variety of uses. Not only does it remove contaminants from water to produce great-tasting, impurity-free drinking water, but it also ensures that water flows freely – especially when used in conjunction with an ice maker.
If you notice a change in the taste of your water before the failure of your ice maker, this could be due to a faulty or expired filter.
Because it’s subject to so many factors, such as frequency of use and natural hard water, each product has an approximate lifespan which should be replaced every 6 months on average. And don’t forget.
Problems With Temperature
If you don’t maintain the correct temperature, your freezer will not function properly. When the temperature is set above 10°F, the ice maker will not be able to produce ice properly.
In LG refrigerators, ejector arms cannot deliver ice to the bin if the temperature is too low. It is recommended that you set the temperature of your freezer at 4°F to achieve optimal ice production.
If your freezer’s temperature remains impossibly high even when programmed to the proper setting, consider checking your doors as well as the seal around them to see.
If there are any problems or issues which might inhibit a closed fit or affect insulation with heat transfer becoming an issue at play here in regard to providing you with conditions that may instigate inefficient performance overall.
Defective Refrigerator Door
LG refrigerators can fail when the door is open. If the door remains closed, ice and water dispensers will operate as long as electricity runs to the device.
However, if the latch is broken or doesn’t close enough for the computer to interpret it as being shut all of the way, then you may experience a failure of some kind.
A multimeter test checks for continuity of switches so that you can identify defective parts quickly and ideally replace just what needs replacing rather than whole-heartedly buying new LG refrigerators in general.
One option that many people forget is to buy a replacement sealant which may offer an inexpensive fix until you have time to fully correct your problem.
Failed Icemaker Module
The icemaker module has many different parts that make all of the ice. For example, there is a blade piece inside of it. It also has a sensor, an ejector blade, and a motor that makes water come out.
The motorcycle spins the claw so ice cubes will go up to get in the bucket. When things are set right, and everything is cool, then the motor turns on to fill the tray with water again.
If things aren’t running correctly, this module should be replaced because there could be something wrong with some pieces that don’t work anymore.
Control Board For Ice Levels
Some refrigerators use an infrared sensor and a bucket to detect when there’s ice in the bucket. When the level of ice reaches the sensor, it interrupts the beam of infrared.
The control board then receives this information and will signal the ice maker to stop making ice. If the control board isn’t receiving power, the system won’t work properly.
First, test whether or not that is the problem by testing to see if the control board is getting power in accordance with its wiring diagram.
If it is getting power, but none of the other circuits aren’t working properly, replacing that component should fix your problem.
Thermostat for Icemaker Mold
The icemaker mold thermostat monitors the temperature of the ice mold, and once it reaches a specific value, the icemaker ejects the cubes and refills the ice tray with water. If for any reason, this stop is not working as it should or not working at all, you’ll have to replace it.
You can easily determine if this stop is defective by checking its continuity. In this case, you will need a multimeter but bear in mind not all multimeters support a low resistance range.
If you get no reading with your meter, that means that it must be changed; otherwise, your ice maker won’t function properly.
If for any reason, there’s no power supplied to the thermostat or something else results in the abnormal coldness of the frost tray, then some control would fail and ultimately result in no current flowing through it.
Faulty Power Switch
LG refrigerator’s ice maker is a separate component that can be turned off even when the LG appliance itself is on. The first thing you should do if your LG ice maker isn’t working is to check that the main switch for it is flicked “on”.
If it is on, then there may still be something wrong with the ice maker or its switch. You have two options available in order to fix this issue.
Option one will be suited for models using a Twist n’ Vac Tray, Custom Cube, or Early Twist n’ Vac tray model. Whereas option two will work for all other models of LG refrigerators.
LG Refrigerator Ice Maker Not Working
Related Guides