LG dryer not drying

LG dryer not drying. Top laundry appliances from top brands like LG are more reliable than ever, and top models come with the latest software that makes them easy to use.

Over time, however, you may find that your dryer is working less or not at all. What could be causing this? You might be surprised to find out that reduced airflow will reduce your dryer’s capacity.

Keeping up with what needs to be done around the house, including doing laundry, is something many consumers dread, much like having to deal with a clogged sink or a broken dishwasher.

LG dryer not drying

lg dryer not drying

There are times when your dryer will run at its highest performance, but there may also be times when it simply won’t heat up.

This could mean that there is a blockage or misuse happening in your ductwork that needs to first be identified and fixed by a professional company before the system can return to normal.

Clogged dryer vents can be hazardous

The dryer vents in your home should be cleaned regardless of the brand you own. It is important to do this because dryers shed lint, and that lint gets stuck in the unit and in vents leading outside.

The clog can restrict airflow inside the dryer, which can cause it to overheat, causing a fire if flammable materials accumulate inside. Regularly cleaning the dryer vent is therefore so important.

Defective Blower Wheel

defective blower wheel

Things get tricky with a dryer. The blower wheel is one of the essential parts that should be well-maintained.

The blower wheel works with the motor to blow air into the dry drum.

Clumps of lint, socks and small articles could escape the lint filter and get caught in the blower wheel.

Similarly, the blower wheel sleeve could loosen up, letting it wobble on the motor shaft.

If obstructed or defective, it may take too long to dry clothes with a faulty blower wheel. To ascertain if working properly, remove the vent and assess the strength of airflow from the vent opening.

If weak, check for obstructions to find out whether it is blocked by lint or simply not strong enough due to a worn-out blower sleeve directly on the slide or within coil tubing sections.

After doing so, rotate it by hand if wobbling replaces it head over heels.

A gas valve solenoid has failed

Sometimes when people are using gas to dry their clothes, the gas valve solenoid coils can get clogged with a buildup of residue from the natural gas supply.

This can cause the dryer to take longer than usual to exhaust its hot air and crisp up your laundry. Inspecting a defective coil for defects or wear will tell you if it needs to be replaced.

You’ll have to replace all the coils in your appliance if you find that any of them are failing over time because this means that they’re all nearing the end of life otherwise.

The moisture sensor needs to be replaced

The moisture sensor in a dryer monitors the clothing’s moisture level and sends a signal to the control board (in this case) when the clothes are dry.

If the moisture sensor is malfunctioning, it could inaccurately report that the clothing is still moist, causing the dryer to keep running even though it’s fine and there is no need for more drying time.

However, this is rare, so before you replace your moisture sensor, check all of those more commonly defective parts like thermostats, heating coils, or thermal fuses.

If you have determined that all of these components are working properly, replace your moisture sensor.

faulty thermistor

Faulty Thermistor

Thermistors are found in some dryers. As a result, the control board monitors the water temperature and turns the heat on and off in response.

Your clothes will dry more slowly, and your utility bills will increase if the thermistor is damaged.

Its heating element is broken

One of the most important parts of the dryer is a component called the heating element that warms the air as it passes over.

If there are any problems with this component, like cracks or inoperability, this could lead to some very unfortunate consequences, literally.

For example, you may have to replace your dryer because either it won’t get hot enough or it won’t heat at all. Therefore, when troubleshooting a heating dysfunction with your dryer.

We recommend first testing for continuity on the defective component with a continuity tester such as our highly-rated multimeter.

The thermostat doesn’t work

The dryer’s thermostat monitors the dryer temperature and shuts off the circuit if it reaches a potentially unsafe level. It may also cause an error code if it has malfunctioned.

It is usually due to a bad thermostat that doesn’t cut out when it should, but there are also other things to look out for as well.

Make sure you run tests on all of the parts which can cause this type of error before replacing any components just yet.

If you have checked everything else and found no problems, then replace your thermostat using a multimeter to test its continuity.

The lint filter may be clogged

Maybe you should talk to the dry cleaners. Those dry-cleaning places sometimes leave residue behind on the lint channel.

Maybe that’s what’s using up all your electricity. Those strips of cloth don’t exactly take up a lot of space in there, and they end up not being so efficient when it comes to cleaning nothing at all.

LG dryer not drying

Related Guide