Kohler Small Engine Troubleshooting. Kohler engines are generally among the most reliable and innovative on the market. Making it easy to understand why they’re considered “best of breed” by many in the small engine trade.
However, any engine can suffer from problems whether it be a result of simple oversight such as running out of fuel or more difficult issues that require special tools and equipment, as well as an understanding of how and when to troubleshoot them based on what is known thus far.
Knowing where to locate needed resources, such as manuals and dealerships, and applying sound troubleshooting steps is key to getting your business back on track should any issues occur with this crucial piece of machinery.
Kohler Small Engine Troubleshooting
Here we discuss some problems with Kohler small engines and how you can troubleshoot them.
Kohler Small Engine Leaking Gas
The primer bulbs are especially sensitive and can become worn down over time. Sometimes with age, rubber can become brittle and can crack.
That’s what you’ll find if the primer bulb begins leaking gas when in use. It is imperative that you buy a new one as soon as possible.
If it’s wearing down, fuel will continue to run out even after priming or the carburetors may begin corroding the fuel system insides- which could lead to clogging which could in return, lead to an explosion or fire.
The fuel tank of your car might also get damaged due to wear & tear over time or by someone outside. Don’t worry if this happens car repair is a job you don’t need to do yourself because you’re busy managing your product while they take care of vehicle touches.
There are many repair services willing to patch up your car for a reasonable price, trust them. They dedicate their whole lives to cars so they know how it works better than you do.
Kohler Small Engine Will Not Start
The ignition coil sends voltage to the spark plug when the engine is running. If the ignition coil is defective, the engine may not start.
Start by confirming that the spark plug is working properly. Next, test the ignition coil with an ignition coil tester. If the ignition coil doesn’t function well, replace it with a new one.
The flywheel key has broken in half and this prevents damage to the engine from occurring by shutting off power to the spark plugs before anything significant happens.
To see if or where your flywheel key cracked on your vehicle, remove your flywheel from your crankshaft which will ensure you know whether or when it’s time to replace one or both of them.
Kohler Small Engine Performs Poorly
Inspect the spark plug for signs of damage or wear after finding the problem spark plug. If the ignition coil wire is damaged, melted, or cracked then you will need to replace the spark plug.
When testing a spark plug, you should get a strong spark between the tester’s electrodes when cranking the engine. If there is no spark, this indicates that the coil is faulty and thus must be replaced.
The fuel filter may also require to be cleaned. A clogged fuel filter may be caused by leaving fuel in your vehicle for an extended amount of time which allows some of the ingredients within it to evaporate while leaving behind a thicker substance that can clog up the engine filter and cause it to misfire.
If older fuel was left in your car and engine, drain out all excess gas from your tank and replace your faulty fuel filter with a new one so that your vehicle runs smoothly once again.
Kohler Small Engine Suddenly Stops
As the fuel cap is consumed by the engine, the level in the fuel tank reduces. Make up for this by letting the gasoline in the tank breathe just a little!
The fuel cap uses a small vent to help let extra air inside of your car’s fuel tank. This ensures that enough oxygen is able to get into your gas tank as you’re running around town and low on gas. If this security measure isn’t working properly, it can cause your vehicle to stall due to a vacuum or vapor lock.
If your engine dies every time you fill up, check out your car’s fuel cap area because it might need some assistance from precision tools from Precision Tune to be more secure so that more oxygen enters your car’s gas tank.
Carburetors often become clogged in an engine. This is very common when the fuel is left over for even just a short period of time, where some of those ingredients that were in it evaporate away, leaving some behind and hardening a bit like how food does sometimes when left out.
It can clog up the carburetor too much (preventing it from getting any mixture during its initial startup) until the engine can’t get its fuel-air mixture properly and therefore stalls or stops working altogether if not fixed right away. If you don’t want that to happen, try cleaning it with carburetor cleaner in your service manual next step.
Kohler Small Engine Troubleshooting