Kohler Generator Won’t Stay Running

Kohler Generator Won’t Stay Running. A generator is a wonderful invention that can help you stay safe and warm when you lose access to standard power.

One issue people come across with generators is they work well for a while, but then suddenly stop working altogether.

This can be very problematic as it stops things from working, such as air conditioners and security systems, and disrupts your business activities. However, there are specific fixes for these situations that should fix the problem.

In this article, we will outline the causes of this problem, so if you suffer from it, these should enable you to fix it using basic ways to diagnose it and tackle it head-on.

Kohler Generator Won’t Stay Running

kohler generator won't stay running

The carburetor might be clogged. This can be a result of fuel getting stuck for too long, which can happen when the generator is neglected for an extended period of time.

The sticky fuel can block the carburetor and often prevent the engine from starting. If this happens, run a mixture of gasoline and oil through to loosen the fuel.

This article discusses some problems with Kohler generators that won’t run.

Water Levels Are Low

If your generator keeps shutting off, chances are that it doesn’t have enough water in the engine. Most large generators use water as a coolant that is poured into the radiator.

If this water level is too low, the generator will automatically shut off to prevent damage to the delicate electronics. Over a certain temperature, some generators shut down automatically.

Before starting your generator, check the fuel injector’s water level. Make sure the other coolant your generator uses is calibrated too. The air flowing through your generator also helps it cool down as it takes away excess heat.

Failure Of The Engine

A more serious problem is when the engine stops working and won’t start up again. This kind of problem needs to be handled by a professional especially if it’s with an older model generator since new generators rarely have these issues.

The solution to this is to call in an expert specifically from your generator’s maker. If it’s just a small and easy fix, it’ll be solved with no problems.

If it’s a big issue which costs almost the price of a new generator it might be best to get a whole new product rather than fixing the old one as spending money on something like that would probably be pointless.

Issue With Spark Plug

spark plug

One of the most important parts of your generator is the spark plug. It plays a critical role in starting your generator.

If the spark plug is fouled and out of order, then your generator won’t start up properly; it will make cracking sounds right after turning it on and shut down in a few seconds.

Open up your engine, locate the spark plug, check its condition. Sometimes you can re-insert the same plug after getting it cleaned or you should get a new one for your generator.

Air Filter Cause

Blockages in the air filter are another cause behind failing to turn on your vehicle. If your air filter is clogged, the generator won’t get enough air from outside therefore shutting down instantly when you step on the starter button.

Change or clean the air filter regularly. A good way to keep yourself informed about such things as air filters and other generator emergencies is by looking into auto repair shops near you and what they offer in terms of quality solutions to fix your broken generator without much hassle and at affordable prices within a short time frame.

Carburetor Malfunction

The carburetor might be clogged or have bad fuel in the float bowl. This can happen if old fuel sits in the small engine for a long time and some of the volatile ingredients evaporate, leaving a thicker, stickier substance that is more like varnish or shellac.

If this sticky fuel gets into the small jets and ports in the carburetor and prevents the engine from running.

If you find yourself with this problem, it’s best to drain any old gas from your float bowl and clean out the entire carburetor with a good cleaning product specifically for small engines.

Faulty Fuel Cap

As fuel is consumed by the engine, the level in the fuel tank lowers. To make up for this, the fuel cap uses a small vent to allow air to enter the tank.

If the fuel cap vent is clogged, air won’t be able to enter the tank and a vacuum or “vapor lock” will occur. This stops the flow of fuel to the carburetor causing the engine to stall.

To determine if the fuel cap vent is clogged, try slightly loosening the cap and then starting your engine.

If loosening your gas cap allows you to start up without issue, it’s likely that you have a clog and will need to replace it with a new one that has been cleaned out thoroughly.

Failure of A Sensor

Today’s modern generators come with a variety of sensors that help to control the behavior of the generator.

Sometimes though, something could happen to these sensors, causing them to fail, which can lead to your generator acting up.

Check the notification on your control panel and replace any faulty component by following the necessary replacement procedure found in your user’s manual.

Lastly, remember to reprogram your generator once you have replaced or fixed something.

Kohler Generator Won’t Stay Running

Related Guides