Kitchenaid Washing Machine Troubleshooting. KitchenAid washing machines are a great way to do your dirty work (no pun intended).
Because they run on electricity and the cost doesn’t change with higher or lower usage, you’ll save a lot of money over time compared to those other companies.
You can expect a long life because these washers were built to last but of course, everything has an end.
Deep cleaning your washer when it breaks down is important because there could be so many issues that could cause the same problem.
In order to avoid spending lots of outside help when you can salvage something on your own, it’s good to learn your machine so that you can determine if the problems are small enough for you to fix yourself.
Kitchenaid Washing Machine Troubleshooting
Kitchenaid Washing Machine Troubleshooting. Here is a guide on how to troubleshoot some issues with KitchenAid washing machines.
KitchenAid Washer Will Not Agitate
The drive motor might be defective. However, the drive motor is rarely at fault for the symptoms that you have described in your letter to us.
Before replacing the drive motor, first, check all of the more commonly defective washer components. If none of those components are defective, consider replacing the drive motor.
To determine if the drive motor is faulty, first ensure that the motor is guarded and receiving power. If the drive motor hums but doesn’t move if it’s noisy and doesn’t turn freely or is not turning at all then replace it.
The motor coupling is an essential component of the washer. It acts as a connector between the transmission, which is responsible for speed changes, and the electric motor that provides power to spin the drum, agitate and rinse clothes.
If excessively overloaded, this part could fail in order to protect both parts that are involved with doing the actual cleaning job.
However, normally it would just wear out over time and its condition should be checked before taking care of other maintenance issues with other components on this washer’s machinery.
If it seems to experience too much resistance when turned by hand, it may be broken and must be replaced immediately.
KitchenAid Washer Will Not Start
The fuse line will be blown if you pull the line fuse when the washer doesn’t work. If you don’t know why it blew. You need to do this because if you don’t, you will have to buy another.
In addition, checking for shorted-out components and fixing them is vital since if you don’t fix anything that’s faulty in the first place right now, then new parts won’t really matter – because they’ll just end up being broken again anyway.
The thermal fuse will blow if the washer overheats. This is normal and meant to protect your appliance from any damage.
If this happens, check to see if it’s been a result of a problem you can resolve on your own or if it’s due to an issue that is beyond your level of expertise and you should consider calling in a professional to inspect further.
If you do decide to call for help, also be sure that you get back up so as not to stress out – because at the end of the day doing things alone may seem easier but it’s always better when there’s someone else standing beside you.
KitchenAid Washer Will Not Spin
Motor control boards provide power to the motor. A defective motor control board may result in the washer not functioning properly or not working at all.
First, check the control board for burned-out components. To determine if the motor control board is defective, ensure that the control board is providing power to the motor.
If it does have power and isn’t providing it to the motor, replaces it immediately.
The clutch is the part of the transmission that lets it be connected to and spin along with the spin tub.
A worn-out clutch will not allow this movement and might not connect properly to what’s inter-connected with it causing problems like your tub spinning too fast or maybe not being able to catch on at all.
It’s important to know when the clutch needs replacement because, without a working one, it could lead to certain complications in other parts of the machine.
KitchenAid Washer Will Not Drain
The lid switch assembly is usually damaged when a washing machine does not drain. The lid switch assembly consists of a number of switches that get activated when the washing machine’s lid is closed properly.
It prevents water from spinning inside the drum while the lid is open. To determine if the valve assembly is defective, use a multimeter to test each of the switches for continuity. If one or more of them has no continuity, replace the faulty lid switch assembly.
Coin traps are a common feature in drain pipes in laundry rooms. The coin trap is hollow, and it’s supposed to capture coins or other small objects that might otherwise work their way into your plumbing system and get stuck on your washer’s drain.
If you notice your washer is having difficulty draining, you’ll want to check if the coin trap is clogged and then remove any excess debris it may contain before removing the coin trap completely.