Kitchenaid Refrigerator Freezing Food. Are you having a problem keeping your food properly chilled? You might have heard of this issue before. Have you tried searching for an answer to the fridge-freezing food question online?
Then read on because we’re here to tell you why your refrigerator may be improperly chilling your food. Solutions for why your fridge is freezing its contents are plentiful, but if one solution doesn’t work for you, it might mean that one of these issues must be at hand.
It could be something as simple as a loose power cord or an air vent that needs to be tightened. The tricky part is that there are so many different varieties of refrigerators on the market today. So what works for someone else’s model may not necessarily work for yours.
Kitchenaid Refrigerator Freezing Food
In this guide, we discuss some issues with KitchenAid Refrigerators when they start freezing food.
Coils Are Dirty
A few coils can be found on the outside as well as on the inside of your refrigerator, that has a few different functions.
A major reason for this is that they act as a heat exchange medium between the refrigerant fluid and the surroundings.
By having dirty coils inside the refrigerator, it becomes harder for them to maintain their set freezing temperature since they have to work harder than before in order to maintain it. This can lead to overcooling which may result in the unnecessary use of electricity.
Door Seals That Leak
Make sure the seals on your fridge and freezer are intact. To keep cold air in your freezer, the seal should be tight. This keeps the air cold. It will be harder for your fridge to maintain its temperature if you can see a leak.
Frozen food can result from this problem. Faulty seals are bad. Food near the vents will get really cold if you do this. Your fridge is running more often in order to maintain the set temperature, but it’s also leaking cold air.
Remove your food temporarily from the area. Although, you should replace the door seal since it has deteriorated, since not only are you paying more for electricity, but you could potentially shorten the life of your refrigerator.
Issue With Damper
A refrigerator’s temperature is controlled by a damper, and it opens and closes to let the right amount of cold air into the refrigerator.
If the door doesn’t seal properly, then too much warm air can leak in through the areas on either side of the door.
As a result, too much cold air will be lost, and it’ll take longer for your food to be kept at the right chilled temperature. Check that the gasket seal is tight and so is any weather stripping where applicable.
Control Board For Temperature
The temperature control board maintains optimal temperatures inside the refrigerator. It controls all of the other electrical components, such as the compressor and fans.
If a temperature control board is faulty, it may send continuous voltage to its components. This will result in the refrigerator being too cool because its parts aren’t working properly.
There are many parts that can be tested before replacing these boards if none of those components appear faulty, consider replacing a faulty temperature control board.
Defective Main Control Board
There is likely a problem with the main control board. Generally speaking, this is not one of the most common components to have a problem, but it does happen from time to time.
In order to replace the component, it is advisable for you to perform routine testing on all of the components that fail much more frequently.
If none of these components fail during the testing process, then there is a very high probability that your control board is faulty and should be replaced.
Faulty Thermistor
The thermistor measures the temperature of the air inside the refrigerator. The control board then regulates power to the compressor and fan based on the readings of this temperature sensor.
If there is a problem with the thermistor, you may find that your food spoils more quickly and that your refrigerator is not keeping things cold enough.
To test if there is something wrong with your thermistor, use a multimeter to test its resistance. The thermistor should be connected in series so that its reading varies as you set different temperatures; if it does not vary in resistance or if it has no continuity, replace it.
Thermostat With Temperature Control
The temperature control thermostat has a built-in switch that directs power to four components: the compressor, condenser fan motor, evaporator motor, and defroster heater.
If your fridge isn’t cooling properly, your problem could lie in any one of these parts. Look for corrosion or lose contacts on the thermostat after removing the door gasket.
The thermostat needs to be replaced if there are no blown fuses or tripped breakers, as this is a sign that it has failed. Apply a multimeter across its terminals to verify this.
As long as the meter displays resistance, it is still functioning, so all you need to do now is check continuity – which determines if electricity is flowing through the switch.
Related Guides
