Kitchenaid oven not heating up

Kitchenaid oven not heating up. You might not have time to use your oven every day, but challenge yourself this week by trying to make it through without it.

As difficult of a task as that seems, most likely you won’t make it even one day without using it for one reason or another: cooking breakfast, heating up water for pasta or tea, etc.

It could be due to poor performance from your appliance’s bake element. Most negative reviews were written based on this precise problem

Kitchenaid oven not heating up

kitchenaid oven not heating up

Whether your KitchenAid oven isn’t heating up at all or if it’s simply not reaching the appropriate temperature, it can be a nuisance.

We will discover some possible sources along with helpful tips straight from the experts. With our troubleshooting guide.

The bake element lacks continuity

When the baker’s oven starts to heat up and when the baking pan gets heated up, you can see that it glows red hot inside.

If it doesn’t glow red in color, this might be a result of the element is not working in a good working condition.

In such cases, most of the elements will come with blisters or holes on them which indicate that they need to be replaced as soon as possible as they aren’t safe for use anymore.

A method used by cooks is to test for continuity in the element to see if it has any electrical flow or not which helps them determine whether or not the individual elements are still working perfectly fine.

Defective Igniter

One of the common problems that plague ovens are when they simply refuse to ignite. This tends to be a problem that’s common with virtually all ovens past a certain age, which explains why it’s so prevalent in older models.

In many cases, this is actually due to faulty igniters worn down over time by extended use, which can make them weak and thus prone to failing at the crucial moment where they’re needed most.

 Faulty Broil Element

Inspect the broil element for hole or blistering. When you bring it to high temperatures, it should glow red hot. If not, your broil element may be damaged and you may need to replace it.

You can test continuity with a multimeter to see if it’s working properly – if there is no continuity, you’ll know the element is broken and needs replacing.

Replace Thermal Fuse

If the oven gets too hot, a thermal fuse can be tripped by the thermostat. The thermal fuse will be responsible for turning off the power to stop the heating process from carrying on.

However, this is not something that happens all that frequently and most of you have nothing to worry about with these things.

To find out whether or not you have a problem with your thermal fuse, you can use a multimeter to test it to see whether or not it has continuity.

If there’s no continuity in your thermal fuse then you need to go ahead and replace it because it means that it has blown. You cannot reset your thermal fuse so if it has tripped, then you need a new one.

An issue with Oven Control Board

The control board is the brain of the oven, which wirelessly sends orders to your cooking components.

If your control board is not sending out orders to the heating components, then you need to check each individual heating component.

Perform heat tests on each part when you are determining whether or not a part is defective.

If all of the parts passed their temp test, then you will have to replace your control board because it can’t be tested with common household tools.

 The Relay board has failed

If your oven is not heating up, you may have a problem with the relay board. The relay board powers an element that heats up the oven. If this relay board is defective or in need of replacement, it must be replaced.

Baking or broiling Spark Electrodes

For a bake and broil burner to ignite, one must use an oven igniter electrode (a device located beside the burner). The electrode functions like a spark plug, sending out sparks that jump to a stationary shield.

If the metal is worn out or broken, the spark might not happen. Look at the metal enclosing where it meets the metal tip of the electrode.

If it looks roughed up or cracked, get a new electrode assembly from your local dealer. Be sure that there is no flow of electricity, to begin with, because if that’s missing then an igniter will not work properly.

The ground must also be working and there should be no electric resistance in order for the igniter to work at all.

The safety valve is not continuous

The gas oven safety valve is designed to work with the equipment in your overhead-type gas boiler.

If it shows signs of faulty functioning, the safety valve is usually not defective however before you go ahead and replace it.

First, make sure to check the condition of all of the other heat-generating elements present in your oven as well since anyone or a combination of these other components could potentially have gone slightly awry causing damage to the main feature which is the safety valve.

Related Guides