Kitchenaid Garbage Disposal Not Working. Has your garbage disposal stopped working? This could be a problem but don’t fret too much about it.
While you can get by without garbage disposal, this is not a good idea and one that should be fixed as soon as possible because no matter how durable the machine is, they have an equally challenging job of breaking things down and disposing of them away.
If your system isn’t physically broken, there are certain methods you can utilize to fix any issues like a garbage disposal that is not working.
Kitchenaid Garbage Disposal Not Working
Kitchenaid Garbage Disposal Not Working. Make sure the disposal is plugged in. If it is plugged in, depress your disposal’s reset button found on the bottom of the unit.
If depressing your disposal’s reset button doesn’t work, then check that the circuit breaker hasn’t tripped at the main service panel.
In this post, we discuss some problems that can occur with KitchenAid garbage disposal.
Issue With Safety Switch
If the garbage disposer won’t turn or run at all, the safety switch may be tripped. The switch protects the motor from overheating when there is a jam.
The switch on the side or bottom of the disposer has a RED button on it that can be pushed to re-set.
If the disposer still will not run after the button is pushed, check to make sure there isn’t an object trapped in or stuck to the grinding plate, which is preventing it from turning.
If so, remove it using the tool provided if applicable otherwise, find something that can remove any lodged rubbish, such as a wooden broomstick.
Start Switch Cause
Some garbage disposers have a stopper switch, which is activated by the start switch and prevents food or clogs from going down the drain.
If your garbage disposer suddenly stops running, first check to be sure a batch of food has not jammed under the Stopper Switch.
This switch can normally be accessed through the sink access panel underneath the disposer with two connecting wires, which should both have continuity when tested with a multimeter.
Test them one at a time to distinguish between them. If you find that your electric disposal is not functional, there are many different reasons this could occur, and it’s usually best to replace it.
Burnt Out Motor
If your drain doesn’t seem to be turning on at all, it might be that the motor has burned out or otherwise broken down. There are a couple of possible causes for this.
It could be that there’s an electrical short in the system causing the current to not reach the motor.
It could also be a lack of lubrication which can occur if food particles get caught around the impellers, twisting them and disrupting their smooth rotation.
If your garbage disposal’s motor stops working, chances are it won’t work again, and you’ll have no other choice but to replace the whole thing.
Replace your old washing machine before it malfunctions rather than fixing it and needing another repair later.
Problem With Wall Switch
If the garbage disposer runs off an outlet, first confirm if the outlet is getting power.
Also, to test the circuit breakers in the home, try plugging a lamp into your wall outlet with a working cover on it and turn the light switch on.
If all of these are working, then it’s likely a problem with this device itself or with the wiring to it.
FAQs
Is it possible to run the dishwasher if the garbage disposal is broken?
If, for example, your garbage disposal is broken, it’s not the dishwasher itself that is broken.
It may just be a problem with the drain lines of the garbage disposal unit, which could potentially prevent water from going down through all stages that it needs to in order to run properly.
What is the process for installing garbage disposal?
The garbage disposal installation process is straightforward if you follow all steps to a tee and all the garbage disposal parts are in working order.
As long as you avoid putting the wrong types of waste into your disposer, it will help your kitchen look its best.
Don’t ever put things like metal objects or glass into your garbage disposal because they can cause damage and affect its operation.