Kitchenaid Dishwasher Not Draining. A KitchenAid dishwasher that doesn’t drain properly could be a problem. However, this can be also easily solved when one knows how to disable the smart button as well as allowing the cycle mode to lapse (transfer).
Just try out pressing the start button so it will surely impact any pending wash cycles or even let you manually proceed with a newfound cycle.
You can also reset the dishwasher by unplugging its power outlet for one minute so it will reset itself and will function properly afterward.
Kitchenaid Dishwasher Not Draining
If your kitchenAid dishwasher refuses to drain away water, the fault may lie in the defective pump. KitchenAid dishwasher has a drain pump that forces water out to the drain hose.
If you continue to find water in the bottom of the dishwasher, a defective drain pump is indicated as a possible cause for this behavior. The pump cannot be engaged if you have a faulty one you need to replace it without fail.
The following are some problems with Kitchenaid dishwashers that do not drain.
Wash Cycle Not Completed
Incomplete drain cycles are the most common cause of dishwasher not draining. The interior computer in your dishwasher has a memory.
If the cycle is interrupted, either intentionally or accidentally, by opening the door, the cycle will resume from that point.
The problem with this is that the computer can get confused since you want it to finish up what it started so sometimes.
You just need to allow the inside of your dishwasher to finish its cleaning cycle without opening/interrupting it prematurely.
Disposal Of Garbage
If your dishwasher isn’t working and there are no apparent issues with it, the problem may be with your garbage disposal. Before you decide to work on the garbage disposal, make sure that you unplug it first.
You can then try using a plunger or stick your hand inside of it in order to remove any debris that might be clogging it up.
There is also a bottom slot for garbage disposals which can sometimes become blocked as well.
To fix this, simply use an Allen wrench in order to loosen some bolts so that any such blockage can be easily removed with minimal effort on your part.
Drain Hose Problem
The drain hose on your dishwasher may be clogged. The best way to fix this is to remove the drain hose either from underneath your kitchen sink.
Through the wall or if your apartments have individual disposer systems, then you would need to remove it from underneath there and look for any obstructions or debris.
You typically notice a clog near the garbage disposer or in between the dishwasher hose and sink drain where they meet.
Balls Of Check
Assembly For Pump And Motor
Water only goes down the drain if the pump and motor assembly are working, so the first step is to dedicate time to make sure these two parts have not become damaged or worn out.
For example, if you’ve recently done some cleaning and scrubbing in the bathtub, it’s important now more than ever to get things checked over before all of that hard work ends up going down the drain.
Faulty Drain Valve
Over time, the drain valve can get clogged with debris, which might result in water not being able to pass through the drain. To ensure that your water flows without trouble, clean out any debris that may be present in the valve.
Just make sure the turn-and-lock handle is unlocked while cleaning out those obstructions. If this still doesn’t help and you’re unable to get water to move through the drain, you must replace the drain valve.
Drain valves are not able to be fixed (if it fails you will have to replace them). However when determining whether or not a replacement is necessary make sure to examine all other aspects of your shower as well.
Defective Drain Impeller
The drain impeller starts the draining process. It directs water into the garbage disposer or line. To remove a broken impeller, see the instructions for your garbage disposer, which may vary based on brand.
If you don’t have these instructions, try looking online for an answer. When replacing it, be sure to double-check that all connecters and wire terminals fit correctly before putting it back together.
Belt For Water Pumps
There might be a problem with your water pump belt. Identify this quickly by checking to see whether or not there is a water pump belt installed on the motor of your dishwasher.
Remove any old and tattered parts, screws, or grating that stand in your way while you get to the bottom of what isn’t working and replace it; usually, all you need is a new screwdriver and gloves. Any problems found should be corrected immediately.
Kitchenaid Dishwasher Not Draining
Related Guides