Kitchenaid Dishwasher Lights Flashing Or Blinking. When the lights on a KitchenAid dishwasher begin to flash, it’s because there is an issue that needs to be resolved.
This can normally be done by simply turning off the power for at least one minute and then turning it back on again.
If these quick fixes don’t do the trick, you might want to try resetting your dishwasher differently. One way of doing this includes adding more water and allowing more time before turning on your machine again.
Feel free to call customer service if these methods don’t help resolve your problem any further than they already have since this is a common issue and also fairly easy to fix.
Kitchenaid Dishwasher Lights Flashing Or Blinking
The Start/Resume light flashing (the one on the right) (Select models) indicates the cycle was interrupted. It could have happened if you opened the door while the cycle was in progress or if the power had generally been interrupted.
However, careful cleaning is possible without turning off the machine. Important: The door must be closed within 3 seconds after restarting.
Malfunction Of The Control Board
Another common cause of blinking and flashing lights on your KitchenAid dishwasher is for the control board to malfunction.
The control board is easily accessible, and you can unplug it and plug it back in with the power ribbon.
Just make sure that you turn off the power to the dishwasher before working with it. Otherwise, you may damage the control board permanently.
Repairs become much more costly when a professional has to be called out to fix something that could have been prevented or fixed in another way by a regular homeowner.
Touchpad Error
First, make sure the display is working. If the main screen is at fault, try pressing some of your other buttons. If that step checks out fine, it’s time to replace the touchpad.
Some manufacturers sell the touchpad separately from the main screen or control panel. Other manufacturers require that you purchase a complete replacement kit, including both screen and touchpad components.
Problem With The Drain Pump
To check if the drain pump is defective, you’ll need to plug in a multimeter and make sure that it’s receiving power by using the continuity function.
If there are no signs of life from the pump motor, you should replace it in order to avoid any further damage from being done to your drainpipe.
However, we do want to warn you first that some units aren’t designed for users who want them for their own use at home.
Carefully read over the product descriptions on their respective websites to see how long they are made for before deciding whether or not to purchase one for yourself.
Defective Heating Element
If the water in your heating system doesn’t reach the proper temperature after a set amount of time, you might hear the overheat protection kicking in.
Utilizing a multimeter to check for continuity when testing the heating element’s connections will help determine whether it has burnt out and needs to be replaced.
If there is no continuity present, then that means that the heating element is faulty and needs to be replaced.
Look For Fault Codes
If the dishwasher lights are flashing or blinking, and there is an error code in the display window,
consult with the wiring diagram, user manual, and appliance repair professionals to get more information about the error.
Kitchenaid Dishwasher Lights Flashing Or Blinking
Related Guide