kitchen Aide Dryers Troubleshooting. It is possible to diagnose and fix KitchenAid Dryer problems by yourself if it is not working properly or will not start.
Often times when appliances are having issues, it’s because they’re lacking lubrication, or there might be something trapped in the dryer hose which prevents air from entering or leaving as it should.
No power or wrong noises coming from your appliance could also mean that foreign objects are lodged inside your machine.
You’ll want to take things apart to clean them out by using the troubleshooting section of your dryer’s owner’s manual before calling for repair service.
Kitchen Aide Dryers Troubleshooting
kitchen Aide Dryers Troubleshooting. In this article, we will discuss some kitchen Aide dryer problems and how to troubleshoot them.
KitchenAid Dryer Won’t Heat
The igniter is like a stove’s match. They ignite the gas to allow the gas to heat up a burner assembly.
If the igniter doesn’t work, then your dryer will not be able to heat up and use the burner assembly (a fancy name for a setting).
To know if the igniter has gone out, you need to test it with your multimeter. If it does not have continuity, then change it.
The cycling thermostat cycles the heat on and off to regulate the air temperature.
If this thermostat is defective, your dryer will not heat, but other parts may still be working correctly.
Before you replace it, test all of the more commonly defective parts.
If they are all working properly, use a multimeter to test for continuity in the cycling thermostat. It’s replaced when there is no continuity in its testing.
KitchenAid Dryer Will Not Start
To determine if the start switch is faulty, attempt to turn on the dryer. If it hums but does not start, the start switch is not at fault.
If no action takes place or there is silence, and the machine fails to do anything, the start switch could potentially be damaged.
Use a multimeter to test for continuity on the start switch. If it does not have continuity, then replace it.
If the dryer belt breaks, check to see if there is a power switch that has shut off the dryer’s power source.
If there is not a switch for this, one may need to press the reset button in order for the dryer to be re-powered again (depending on brand and model, of course).
Otherwise, if the owner suspects that it could be more serious than just replacing a broken belt, one needs to schedule time with a repair person before continuing without further delay.
KitchenAid Dryer Is Not Spinning
The drum bearing provides support for the rear of your dryer drum.
This bearing wears over time and sometimes can grind away from the motor, resulting in a defective mechanism that leaves you with unbalanced clothes that might not dry at all or result in undue damage to some other part of your dryer.
To double-check that you’ve addressed this issue properly, take off the belt and have someone hold a hand on each end of the drum while you try spinning it back and forth by hand (yes, this process will take a while).
If you hear any grinding or this generates resistance when moving, there’s likely an issue with the bearing – so replace it.
The dryness control board interprets the information it receives from the sensors to determine when the clothes are dry.
When one of these components is defective, it could cause the dryer to end its cycle prematurely.
Signs that you may need a new control board include a longer-than-average drying time, excessive heat, an overly hot drum, and error codes on your digital display.
Before replacing the control board, checks all of the other commonly malfunctioning parts in your dryers, such as the heating element or thermal fuse.
If you find that all of those other parts are working properly, then it would be likely that you need a new control board.
KitchenAid dryer Will Not Stop
The lint filter might be clogged, which typically happens due to dryer sheets and fabric softeners. If your dryer’s lint filter is clogged, chances are it’s because of a residue caused by the use of these products in the past.
If this is the case, you can easily take care of this with a dusting screen and vacuum cleaner that come with a set made for such problems.
After doing so, you’ll notice how much easier it’s become for there to be better airflow because less lint will be gathering up on its own.
If your dryer doesn’t seem to be drying properly, check the lint filter. It’s possible that a clump of lint has inadvertently collected and bound up the exhaust.
Unplugging the machine may cause a build-up of heat within the dryer, preventing you from easily opening it to remove the troublemaker.
If this is true, wait until the machine has thoroughly cooled down before attempting easy fixes, such as removing any excess lint biding around a latch or simply helping to dislodge an obstruction manually by sticking your hand into the vent pipe.