Kenmore refrigerator leaking water on floor

Kenmore refrigerator leaking water on floor. Regardless of whether your Kenmore refrigerator is new or has been in use for a while, some problems may be encountered.

One of which can be one with leaking. So in this article, we will discuss the problem of a leaking Kenmore refrigerator and how to fix it.

Note that the solutions discussed in this article apply to any area where you notice leaking on your refrigerator.

Kenmore refrigerator leaking water on floorkenmore refrigerator leaking water on floor

why my Kenmore refrigerator is leaking water on floor. If the microwave’s defrost drain is clogged or frozen, the excess water will overflow the drain tube and drip down to the bottom of the compartment. This water can eventually leak onto the floor. Check to see if your Kenmore freezer’s bottom freezer drain is clogged or frozen in order for you to solve this problem immediately!

I figured out how to fix your Kenmore Refrigerator from leaking water on when you’re not using it!

Refrigerators should be leveled

The first thing to do to stop your refrigerator from leaking water is to remove the grille from the front of your Kenmore refrigerator.

Examine the leveling nuts underneath and select which you would like to use to achieve a level fridge. If turning them clockwise raises the legs, turn any of them this way until the fridge is even across both sides.

Or if turning counterclockwise lowers the legs, turn any of them this way until they are visible beneath the fridge and even across both sides depending upon how close to the level it has become.

Check the water levelcheck the water level

An ice maker and water dispenser are supplied with water via a water inlet valve. Make sure there is no leak in the waterline. The water line should be replaced if it is the cause of the leak.

Defrost drain unclogged

Another cause of water leaks in refrigerators is a clogged defrost drain. The defrost drain carries melted ice and other liquids through your refrigerator when you’re called to use the defrosting cycle.

When this disposal system becomes clogged, the water meant to go down the drain will instead spew throughout your appliance.

It’s vital that you address this situation quickly to avoid further damage to other components inside of your unit. Now, we want you to inspect the drainage system specifically its entrance because debris such as food may be stuck to it. To remove this debris, try using warm water with a little dish soap on a damp cloth or paper towel.

Drain pans must be checked

Freezers come equipped with a drain pan to catch any dripping water that might seep from an ice maker or drain from the defrost cycle.

The condenser fan blows warmer air into the bottom of the freezer, further ensuring anything that does end up getting wet is definitely going to dry out fast.

In order to make sure your drain pan doesn’t collect more water than it needs, we recommend inspecting the drain pan on a regular basis for cracks of any kind.

If you see something suspicious, there’s a chance your condenser fan or drain tube may not be as efficient at its job as it should be which is why it’s important to get this refrigerator checked out by an expert right away before any damage can occur.

Defective Water Filter

The water filter was not installed properly. This could lead to leaks from the filter housing. The water supply should be turned off before the faulty filter is removed and a new replacement is installed.

Faulty water inlet valve

The water inlet valve is responsible for supplying the dispenser with clean drinking water and the ice maker with ice cubes.

If this particular area of the refrigerator seems to be weaker than a few other places, it could easily crack or become loose which would obviously make it possible to leak water all over your kitchen.

Right now, we want you to check whether or not this particular part is properly secured to the cold water supply line as well as make sure that there aren’t any signs of cracks because these kinds of things can lead to a bigger problem.

Problem with water tank assembly

Look for any signs of leaks in the water tank assembly. Detecting small leaks can be tricky, so keep your eyes open! When you discover a leaky tank, it’s time to replace it.

The best course of action is to replace the faulty water tank with a new one from your supplier. The tank sealant is difficult to apply to plastic and may appear peeling in areas after drying. Do not attempt to repair or reseal the water tank, as this will permanently damage it.

The water filter housing is faulty

Cracks in the housing of the water filter should be looked for. In the event that you discover cracks in the water filter housing, replace it immediately to avoid a health concern.

Kenmore refrigerator leaking water on floor

Related Guides

Leave a Comment