Kenmore refrigerator ice maker not working

Kenmore refrigerator ice maker not working. If you have a Kenmore ice maker that’s not working, a few investigation and troubleshooting steps might be able to help.

The most common reason the ice maker won’t work is if the ejector’s arm is not moving. That can happen if there’s a problem with the ice maker switch or if there’s a misalignment in the refrigerator or freezer door that prevents it from completely closing on its own.

We’d advise you to take a look at this repair guide for Kenmore Ice Makers below. It outlines, step by step, what you should do first to determine what could be wrong.

Why Kenmore refrigerator ice maker not workingwhy kenmore refrigerator ice maker not working

If the refrigerator ice maker isn’t working, check the icemaker control switch. It may have been turned off accidentally as this is a common mistake for many homeowners. If the switch has been switched ‘On’ but you’re still not experiencing ice output. it’s a good idea to test the integrity of the control by using an Ohm meter to ensure it is functioning. Replace if required.

In this article, I will show you how to fix the problems with a Kenmore Refrigerator Icemaker. You’ll also learn what are the most common problems with ice makers.

Ice maker assemblies

If you’re noticing that your Kenmore ice maker stops making ice, it could be due to a faulty assembly unit.

To diagnose the root of the problem, just turn on your fridge and wait until it reaches its optimal temperature range.

A freezer’s temperature should never exceed 5 degrees Fahrenheit since it causes an ineffective ice-making cycle.

Ice maker Module

Refrigerators have icemakers inside their doors to create ice when the customer needs it. Some Kenmore icemakers are in the front, while others are found in the freezer door.

No matter where your icemaker is, it’s connected to electricity and water in some way. To troubleshoot Kenmore icemaker repair issues, a technician will need to locate problems with this unit.

Defective Control Board

An automatic ice-level control board helps to detect the proper level in your freezer correctly. However, if ice cubes reach the maximum, an interruption occurs on the infrared light, which turns off the ice maker.

But in spite of how well things can run if your product is well taken care of, it’s crucial when you determine what kind of product quality type you want to achieve or when looking at products themselves in terms of their material, durability, and their ability to endure lots of use over time without repairing them.

One way that marketers can do this in order to identify potential hardware failures is by speaking with experts about their insights into your targeted customer base because there are few people who know better than they do when it comes down to what features are most worth expending money on for specific groups of consumers.

Faulty Door Switchfaulty door switch

A door switch is a small yet important part of a fridge. It carries two very important functions within the body of the appliance.

The first function it performs is turning off the ice maker and dispenser when a person opens a freezer’s door and turns on the interior light when a person closes it.

For this reason, if this device malfunctions then both these important features will not be carried out again by the device.

In addition to that, you will have to repair it as soon as possible in order to get your refrigerator back working properly.

Water filter issue

A clogged water filter can restrict the flow of water to the dispenser, which in turn could prevent the ice maker from working properly.

Having a clogged filter doesn’t mean you need to replace it right away, but it should be replaced about every six months in order to maintain enough flow and ensure the quality of the water is in top condition for your consumer’s use.

Temperature is above 10 degrees F (-12 degrees C)

An ice maker (refrigerator) is designed to operate with the temperature at or below 5 degrees Fahrenheit (-16C) in most cases.

If your refrigerator temperature is set above 10 degrees Fahrenheit (-12C), the ice maker may not produce ice cubes efficiently.

The general rule of thumb for your refrigerator freezer temperature is to keep it at 5 degrees Fahrenheit (-15C) or below. If you notice that the freezer door gasket is damaged, leaky, cracked or the seal has loosened, this could be inhibiting its ability to hold cold air within itself.

Consider replacing it if it appears worn out, especially if there is excess moisture around the door or water leakage inside where parts may have come into contact with water.

Water Inlet Valve problemwater inlet valve problem

The water inlet valve is a big part of your refrigerator’s built-in water filter system. It is an important piece of hardware that keeps you safe and healthy by ensuring that no harmful bacteria gets into the water supply to be distributed throughout your kitchen.

The inlet valve opens up when there is 20 PSI of pressure, then allows water to flow through into the ice maker to be transformed into ice cubes.

If the sediment inside the refrigerator stays in one place for too long, it can block the internal freezing tubes, thus preventing your refrigerator from producing ice.

This means you’ll need to check either the pressure or power supply functionality of this device so that everything works seamlessly together.

Low Water pressure from the housing supply

The water pressure may be low. The water inlet valve supplies the food dispenser and icemaker with running water. The water inlet valve requires 20 psi to function properly.

Check the water flow and test pressure to determine if it is at least 20 psi.

Kenmore refrigerator ice maker not working

Related Guides

Leave a Comment