Kenmore oven troubleshooting

Kenmore oven troubleshooting. With a Kenmore oven, stove, or cooktop, you have an upscale meal-prepping appliance that offers near-instantaneous heat for any high-quality cooking performance and mouth-watering meal you can imagine!

Even the best quality home appliances require a bit of tender love and care from time to time to remain in good condition.

Here are some maintenance and troubleshooting tips for keeping your Kenmore appliance operating at its peak for as long as possible.

Kenmore oven troubleshootingkenmore oven troubleshooting 2022

If your Kenmore oven isn’t working properly, you might be able to take care of the issue yourself rather than hiring a service person.

Make sure that you’re using replacement parts that are compatible with your brand and model number of Kenmore oven.

If you’re having issues with your Kenmore oven, here are some troubleshooting tips that you can follow to fix the issue.

Power problem

If the oven’s display screen is not lit, check and make sure the breaker in your kitchen that controls the electrical power to your oven isn’t switched off by mistake.

If there is still no power to your appliance when you’ve double-checked this, call an electrician to inspect your home’s wiring.

Defective Thermostatdefective thermostat kenmore oven

Place an oven thermometer on one of the cooking racks inside your oven to test its accuracy. To do this, put your oven on “proof” mode for 10 minutes at 375 degrees, making sure that you’ve set it to Fahrenheit instead of Celsius.

If your thermometer’s reading is not between 370 and 380 degrees after the 10 minutes are up, recalibrate your thermostat according to the manual’s instructions.

Faulty Kenmore Oven broiler

The broiler element might seem to have burned out. When an active broiler element glows red, it is heating properly. If it does not glow red or appear to be heating, inspect the surrounding areas for any signs of damage.

Look at the broiler element to see whether there are holes or burnt blisters on the surface. To make sure that the broiler element has not burned out, use a voltmeter to test for continuity across its terminals.

If there is no continuity, replace the broil element with a replacement part specific to your oven’s brand and model number.

Kenmore Burner Stove won’t lightkenmore burner stove won't light

The spark module supplies power to the surface burner spark electrode in order for it to produce a strong, reliable spark each time the burners are turned on.

If your cooktop’s burners aren’t producing a consistent or reliable spark when turned on, you’ll need to replace the spark module located behind the cooktop.

Make sure that all connections are secure by checking them with an OHM meter before replacing the Spark Module. If all is well, remove the faulty Spark Module and replace it with a new one per panel instructions.

Kenmore oven won’t heat

The igniter is the most commonly defective part for an oven, not heating. The igniter has two main functions: A) it draws electricity through the oven safety valve to open it and B) it gets hot enough to glow and ignite the gas in the oven burner.

If the igniter gets weak, it will fail to open the safety valve correctly and if the valve does not open, then your oven will not heat.

To determine if your igniter is defective, observe your ignition when you turn on your oven. if it stays on for more than 90 seconds without igniting any gas flames, this indicates that your igniter is too weak to open your safety valve.

If your ignition is weak, replace it. If you can’t get a fire going at all, use a multimeter to test out whether or not you have continuity within your former element.

Kenmore Oven fan won’t turn off

In the oven control board, relays control power to the bake, broil, and fan based on the user settings and sensor input. You may find that your oven fan continues to run even if you turn it off.

Check the oven thermostats located nearby to fix this problem. The most common reason for fan failure is a malfunctioning thermostat.

The oven does not bake evenly

If the bake element of the oven is not heating, it will cause uneven cooking of food placed in it. If the bake element is glowing red-hot, this indicates that the element is heating properly.

Should you find that this isn’t happening, check to see if there are holes or blisters visible on the bake element itself.

It may also be less obvious but if testing the continuity reveals that the bake element does not have continuity, then it would be safe to conclude that it has burned out and needs replacing.

Repairing Kenmore oven doorsrepairing kenmore oven doors

The oven door repair for a door hinge in many instances does not require the replacement of the hinge and in most cases.

This alternate method can save you money and allow you to undertake the repair on your own if you have the skills and tools to do so. If not, then finding a professional oven door repair person may be necessary.

Kenmore oven troubleshooting

Related Guides