Kenmore oven not heating. Kenmore is a popular brand of kitchen appliances. They have a large collection of highly reliable gas ovens that are available to purchase from official stores.
These handy devices help make cooking a lot easier by using many different features and elements for specific purposes, but there’s nothing helpful about a broken oven if it doesn’t heat up.
Therefore, we have compiled a list of solutions to help us move forward.
Kenmore oven not heating
The oven could have any number of faults. For example, baking a few too many things, which would allow the heating component to overheat and possibly burn out over time.
A faulty thermostat may not respond quickly enough, causing the switch to stay on longer than normal, thus causing the heating element to continue to operate after it has reached the desired temperature.
The switch can even get jammed inside the door as well. So that’s what we’ve written here – a list of possible fixes for a Kenmore that’s failing to heat normally.
Power problem
The first and most obvious reason why a Kenmore gas oven will not heat up is because of an issue with the electrical supply.
Since most gas ovens operate on 120 volts, it’s important to make sure that power is flowing smoothly to your appliance in order for it to work properly.
Since most homes have potential problems in their electrical systems, you can ensure your Kenmore oven gets the required power by testing the outlet the oven is plugged into with a multimeter.
If there is an issue with the supply or voltage that goes into your home or apartment building that could be stopping you from using your gas range, please contact someone at your power company so they can mend any faults you may have.
Broil Element Issues
This second troubleshooting issue is related to the broil element, so you’ll need to be extra careful during this procedure.
Since this is an oven element, it’s important that it be in fully functional condition at all times so as to ensure your safety.
While using a multimeter would likely suffice for most people, if your tools don’t include one of these common electrical testing gadgets, you can easily find them in nearby hardware stores.
Igniter Issues
The igniter is one of the most important parts of the oven. It’s a part that uses a spark to control a safety valve and open up the flow of gas whenever it needs to.
However, if there is ever something wrong with the igniter, no amount of electrical current will have any impact on releasing the flame from being emitted from its spark, so there is no point for this particular part to be used as well as consumed unnecessarily.
If you observe your igniter after turning on your oven and notice that it hasn’t been activated yet despite being on for over a minute and a half without releasing any sort of flame or even being able to turn it on at all.
Then there’s a good chance that it has already become unfit for further usage and you might want to start looking for a replacement soon before things go from bad to worse quickly.
Defective Thermal Fuse
It happens more frequently than one might think with Kenmore gas ovens. Fortunately, the problem can be corrected easily.
Whenever the oven’s heating element begins to glow red while it is on, you should immediately turn it off. There is a thermal fuse in gas ovens that will blow if there are signs of overheating.
As soon as you’ve turned off the power, check the fuse to ensure it’s not blown because if it isn’t then the problem lies elsewhere (like the power breaker or wiring, for example).
It is only after you have inspected the fuse that you will be able to replace it quickly and easily since this part is very accessible and easy to replace.
Bake Element fault
If the bake element does not glow red, it’s likely that the bake element has burned out. If this is the case, you’ll want to inspect it for holes or blisters in order to determine if your element is in fact, partially destroyed.
If it is, use a multimeter in order to check for continuity in your element; if there were none in your previous test runs when the bake element was lit up red hot, then you should replace the element.
Faulty Control Board
When the oven control board is defective, it may misread the user settings. Because of this, some parts of your oven might not heat up, turn off, or even cause a fire.
This is why it’s especially important to make sure all of the components are working properly before deciding that you need new parts.
Once you’ve determined that your heating components are good to go, go ahead and replace the oven control board if you suspect it is defective.
Safety Valve problems
A safety valve, in an oven, is a safety feature that handles gas to make sure things don’t get too heated up. So when you turn on the gas, there is a safety valve that makes sure that happens.
The easiest way to check if it’s working properly is by doing a continuity test, buying a multimeter for this would be cheap and worth it spending some money.
Burned or loose wire connections
Sometimes when using the oven, you might suddenly smell something burning. Upon inspection, you’ll notice the smell suddenly stopped when you opened the oven door.
It’s times like these when it can be helpful to have a spare wire or two available in case there is a short in one of your wires.
If your wire shorted out, you would most likely see evidence of this along the path that electricity travels between its source and destination i.e. near where your power cord meets with elements in your oven.
Valves and pressure regulators’ fault
The pressure valve and regulator assembly is a very important part of a hot water heater, a device used to convert the energy from natural gas or oil into heat.
The pressure regulator controls the flow of energy from the natural gas or oil through the water heater by allowing for adjustments in temperature and flow rate.
In most cases, this component works very well at its job. However, it can experience problems if something goes wrong with any one of its sub-assemblies or parts that are critical to getting it to do what it is supposed to do.
Check all the more commonly defective parts first before replacing the valve and pressure regulator.
Kenmore oven not heating
Related Guides
