Kenmore front load washer won t spin. Does your old washer leave clothes worn, faded, and damaged? Get rid of that wrinkle in your closet because it’s time to upgrade.
Kenmore washers combine innovative technology with heaps of features for top-tier performance.
These front l washers are well known for their low water usage and room for folding laundry up top on the tub.
When paired with a dryer, the steam wash option can really help speed up the cycle time! Find out if one of these models is right for you by checking out the models with steam now.
Kenmore front load washer won t spin
If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washing machine transmission.
If the washer senses an overload, like too many clothes inside, it will shut down to prevent both itself and its transmission from being damaged because the motor coupling has a way of sensing when something won’t allow it to rotate correctly or evenly.
If the door latch is defective, the washer will not spin or start. Here we will discuss some common solutions for Kenmore’s front load washer won’t spin.
Motor Coupling Issues
The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will break in order to protect both the motor and transmission and ensure they are not damaged by overuse or misuse.
By now you might have noticed that I have started using new verbs in my sentences (connects, fail, broken, etc.). This allows me to paint a better picture of everything that’s going on.
Overloaded Washer
When it comes to your laundry, you can’t afford to be careless. You have to consider which machines are able to handle the load of different types of clothes or fabrics and whether or not you put in too many heavy items that might damage the washer and slow down the speed.
Defective Drive Motor
The washer hums or makes a loud banging noise. The drive motor might be defective.
To determine if the drive motor is defective, first ensure that the motor is getting power by plugging in the unit to an electrical socket or testing voltage across both terminals of the motor with a voltmeter.
If power is available to the drive motor, but it’s burning smell or not turning when you push buttons on the machine’s control panel.
If so replace it. To avoid burning out your replacement motor, make sure you don’t overload your washer and run only one load at a time when you do use the appliance.
Loose Drive Belt
Inspect the drive belt to see if it is worn or split. If you observe that some threads of the belt show severe wear, it would be advisable to replace them.
However, if the belt only slightly shows tiny splits, try tightening it and see if it works for a few more months.
A defective lid switch assembly
The lid switch assembly prevents the machine from spinning when the lid is open. If the lid switch assembly fails, the machine will not spin.
To determine if the lid switch assembly is defective, use a multimeter to test for continuity. If there is no continuity, replace it with a new one for a proper fit.
Motor Control Board is not working
The motor control board provides power to the motor, if it is defective the washer will fail to work.
The first step in diagnosing this issue is to check that the control board has power, but if it doesn’t have power check for burnt-out components and repair or replace accordingly.
Faulty Door Latch
The door latch secures the washer door during operation. Once the washer door is closed, you can start it up.
If your door latch is loose or broken, it will not allow the washer to operate properly.
Inspect the door latch for damage if your washer isn’t working.
If the door latch is damaged and cannot be repaired, replace it.
To determine if your new part had failed electrically, use a multimeter to test any switches on the part for continuity.
If one of these wasn’t intact when activated, replace the switch with a new one if your device has failed you yet again!
Problem with Rotor Assembly
The rotor interacts with the stator to create a strong electromagnetic field, which rotates the tub in either direction.
If any bar magnets on the rotor are damaged, or any part of the rotor is defective, the washer may not spin or agitate. To determine if the rotor is defective, inspect the rotor for damage and replace it if found faulty.
Kenmore front load washer won t spin
Related Guides