Kenmore Freezer Troubleshooting. Kenmore Freezers are truly a wonder of the modern world. We can’t imagine that people actually lived before they existed. Just think about it you could buy more ice cream now than ever and not have to worry about it going bad for extra days, or even weeks if you have a big family.
It’s not hard to see why these personal refrigerators have become so indispensable in our society just ask anyone who owns at least one.
Still, there are some things about freezers that could catch people off guard when they mistakenly don’t follow them.
That is why we’ve decided to talk about keeping your freezer in tip-top shape, helping your family save money and food while ultimately reducing the possibility of having to pay repair charges.
Kenmore Freezer Troubleshooting
The following are some problems to troubleshoot with Kenmore freezers.
Kenmore Freezer Has No Indicator Light
The user control and display board don’t work. However, this isn’t usually the case. First, check if the light is burned out by first checking if the indicator light is on or off.
If the indicator light is off, then there is a short in the wiring that needs to be repaired. If replacing the wiring doesn’t fix the problem, then replace the user control and display board.
When it comes to your indicator light, make sure you take a look yourself before doing any serious work by crawling under the freezer.
That way you can check up on whether the wires that are connecting it are fine or if there’s been any damage to the wires that might lead to you replacing it with a new one.
Kenmore Freezer Coils Are Frozen
The defrost heater comes on several times a day to take care of any frost that may have accumulated on the freezer evaporator coils. Before it can turn on, the defrost thermostat has to sense that there is ice or frost on the evaporator coils.
The defrost thermostat will only allow the heater to kick on when enough frost has built upon it and prevented heat from escaping into the freezer’s cold space.
The door gasket prevents air from leaking in or out of the freezer. A torn door gasket can leak humid air into the freezer. Humid air condenses and freezes on evaporator coils when it passes over them. Humid air constantly leaking into the freezer causes the evaporator coils to ice over too quickly.
Make sure the gasket is creating a good seal by closing the freezer door on a dollar bill and pulling it out from under the silicone layer that seals it so that you don’t damage any screws or springs. A dollar bill that won’t pull out or push in with your hands indicates a problem with your door gasket.
Please check all of your other refrigerator seals first to make sure it’s not an overall problem, but otherwise, continue replacing this seal if needed.
Kenmore Freezer Runs Continuously
The evaporator fan motor is the component in your refrigerator that pulls air into the coils and pushes it around. In most refrigerators, this motor will not run when the door is open.
The first step to take to diagnose a problem with your evaporator fan motor is to check that the door switch, which must be activated for the motor to work, is indeed working by manually moving back and forth.
If everything seems fine up until that point, but there remains no other way of getting the motor running, then you may have an issue with your evaporator fan motor or, even worse – a broken motherboard.
The defrost heater turns on throughout the day to defrost the freezer’s evaporator coils. Before the defrost thermostat senses that the coils are cold enough, it will activate the heat by turning on the defrost thermostat.
Kenmore Freezer Won’t Work, Clicking Sound
The compressor is a motor that compresses the gas and circulates the gas through the evaporator and condenser coils. A multimeter will be used to test the continuity of the pins on the side of the compressor to find out if there’s an open circuit or not.
This will tell you whether or not it’s defective. If it is defective, it’ll need to be replaced by a licensed technician. If it doesn’t seem to be faulty, though, then move on to testing the start relay and run capacitor, as this will help determine whether or not these items have anything causing them to fail, which may, in turn, lead you to either get rid of bothersome faulty parts or keep them around if they’re required.
If the start relay is pressing down on the compressor, then it will not come back up without continued pressure. If the start relay is defective and is no longer providing that needed pressure, then you have some issues to sort out.
Remove the freezer’s cover and examine the start relay with a multimeter in order to know whether or not it’s working properly. If it isn’t working as it should be, then you need to replace it with a new one in order for your freezer to start cooling again.