Inglis washer Machine Troubleshooting. Washing machines are an important part of many homes, and these days with busy schedules it’s easy to find yourself running back and forth in your household doing caretaking tasks that may otherwise be overlooked.
Not only do washing machines clean your clothing but they also are responsible for refreshing the upholstery on your furniture as well.
One of the ways you can save time, money, and energy is by troubleshooting problems in your Inglis brand washing machine before calling a technician or other pro to demand their services.
Inglis washer Machine Troubleshooting
Inglis washer Machine Troubleshooting. Some common problems related to power supply issues, water pipes behind the washer itself, or more commonly control panel issues, can often be quickly resolved by troubleshooting the problem yourself often saving a lot of unnecessary expense.
The Inglis Washer will not start
The fuse in a washing machine keeps track of how much heat is running through the appliances, and when it reaches its capacity, it will release water to prevent a fire.
If it does not release water, the circuit can potentially overheat. If you are having problems with the washer, or if you turn it on and nothing happens at all, check over all of the wiring going into the main box for any exposed wires that could short circuit.
The main disconnect switch also needs to be removed as well so you can check for any other problems going directly into that specific point.
If everything looks fine but there’s still no power going into different parts of your house, this might be another case of a bad breaker or fuse though, and not your washing machine.
The Inglis washer isn’t draining
Sometimes drain pumps can become clogged by debris getting stuck in the hose. In order to remedy this, remove the drain pump and check for any obstruction in the hose.
If all hoses are clear of any issues, there could also be that a sock or piece of clothing has gotten stuck inside.
To remedy such an issue, locate where the pump is hidden under a dresser or underneath a bathroom sink for example, and unscrew it from its housing, taking care not to drop it down the pipes.
Check inside with a flashlight if you couldn’t find anything at first glance chances are those pesky socks are hiding away somewhere within.
The Inglis Washer does not spin
The lid switch assembly mechanism is made up of switches and springs, with a conductive plunger that senses when the washer’s lid is open or closed.
When the washer’s lid is properly latched in place, it presses down on this plunger, closing the circuit and allowing current to run through the motor’s control board.
In order for the high-speed spin cycle to be enabled, the lid switch mechanism must be functioning correctly.
To test this, use a multimeter to determine if there is continuity between a top and bottom contact on either side of the plunger.
If there isn’t continuity between these points, it indicates that one or both of them are faulty and will require replacement.
The Inglis Washer makes a lot of noise
The bearing helps to keep the inner tub spinning smoothly. The outer shaft and e-clip must be removed, then the tub unit can be accessed by removing the three screws in front.
Remove the bolts holding on the pulley and remove [all] the parts that hold it in place. To replace just the bearing and seal it will require you to remove [all] of this and replace both accordingly.
Leaking Water from Inglis washer
The drain pump collects water that is sent from the washer to the sewer system. If the pump is damaged and can’t collect water, it will leak inside the machine.
To fix this problem, check for damage to the bearings and seals. Be sure there isn’t any rust on the shaft or housing of the pump at least every six months. If rust is found, replace the drain pump.
Also, be sure that nothing has rubbed against any part of the pump during normal operation – this could cause rust and damage components if not careful.
The Inglis Washer refuses to agitate
If the washer won’t agitate, there could be a series of issues that could be causing the difficulty.
The solution could lie in replacing the agitator repair kit which is most likely to cause issues when it comes down to making sure the clothes get agitated so they will eventually spin in your machine.
When all of these things are working correctly and efficiently, it’s very likely that you will not have to worry about any other issues you might find when dealing with your washing machine.
The door or lid of the Inglis washer won’t lock
The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly.
The door lock can fail either mechanically or electrically. To determine if the door lock has failed, either way, inspect its working order to ensure it’s secure and fully functional.
Troubleshoot any mechanical issues by replacing appropriate internal housing parts or otherwise re-attaching damaged components as needed based on your visual diagnostic assessment of what’s wrong between now and then.
You may also want to troubleshoot/repair any electrical problems that have arisen from a faulty connection.
If you are able to see what needs fixing up close when visually checking for signs of trouble yourself before deciding whether or not replacement parts need to be brought in if your troubleshooting doesn’t get rid of all suspected issues.
The Inglis washer has stopped in the middle of a cycle
When the lid is open, the lid switch mechanism prevents the washer from spinning. The washer may stop in the middle of a cycle if the lid switch component breaks.
Test each of the lid switches for continuity using a multimeter to see whether the lid switch assembly is damaged. Replace any lid switches that do not have continuity.
The water intake valve opens during the rinse cycle, allowing water to enter the washtub.
The washer will continue to wait for the water to enter if the water intake valve malfunctions, leading it to halt in the middle of the cycle.
Use a multimeter to check for continuity if the water inlet valve is broken. Replace the water inlet valve if it does not have continuity.
Inglis washer Machine Troubleshooting
Related Guide
