How to Use Hoover Carpet Cleaner. If you have carpets in your home, you may know how difficult it can be to take care of clean.
But thanks to the home carpet cleaner, now you can get a much deeper clean with just one machine.
Carpet cleaners were made to help people save time and money because they do not need the help of a professional cleaning company.
There are many different ways to effectively use a home carpet cleaner, but we’ll mention four easy steps here to show you how easy it actually is without damaging or ruining your carpet’s fibers.
How to Use Hoover Carpet Cleaner
You have most likely brought home a Hoover to clean your carpet, or maybe you hired a cleaning company that did it for you. Regardless of how you came across this tool, one thing is certain:
At some point, while your Hoover is humming away in the corner of your living room, you will wonder to yourself why these tools are so loud and how you operate them.
To get started using your Hoover, prepare the area by removing everything from the vicinity.
If possible, move all furniture from the room so that there’s nothing blocking access along with no concern about any important belongings getting dirty.
Next step: figure out where to plug the unit in. Determine which area offers the most clearance and is easy to reach without being tripped over by furniture.
Once everything has been set up and cleaned for proper use, give stirring instructions a try.
Now that we’ve explained how to clean carpet with a Hoover let’s tell you how you can use brushes on different surfaces.
Start Cleaning
The first step to choosing the right Hoover carpet cleaner for your needs is deciding on whether you need a machine that is meant to work solely as a steam cleaner or one which also has cleaning functions.
If you’re more inclined towards the latter, there are several options available to you when it comes to handling larger stains or using detergents.
In our case, We’re talking about a simple carpet-cleaning machine here. More often than not, these are handheld vacuums that offer a decent solution in terms of removing dust and small particles.
Of course, this will vary from product to product so we suggest that you refer to the owner’s manual before cleaning any carpets or upholstery.
Look for The Water Tank
That is what you are going to fill with water and detergent. There should have been some included with your purchase or rental.
Use as much as is recommended and then add water to the fill line. Mix both until the detergent has been mixed in well with the water.
Turn On Hoover Cleaner
You will have to wait for some of your devices to heat up and for others, you get started right away.
You may have to choose different settings on the cleaner depending on the surface you are cleaning.
Once you have chosen your setting, you can pull the trigger and begin to work your way across the floor by pulling back and forth.
As a rule of thumb, if there are stubborn stains, move back and forth until they are gone using overlap motions.
Make sure that each movement overlaps the previous one so that all areas of your floor are covered fairly evenly.
Rinse it Well
Once you have cleaned the entire floor with detergent, make sure to rinse it. You do not want your carpet to feel sticky or unhealthy any longer.
Remove anything that is left in the tank from the solution and replace it with fresh clean water before repeating your journey until all areas are sufficiently covered again without being too excessive or over saturating any area unnecessarily.
When you can feel how much cleaner and softer your carpet feels, depending on the extent of damage in those spots of course.
You will know if you’ve gone overboard when your carpet starts becoming dry once again after a few hours, at which point you will wash it again with fresh detergent and water as long as there’s still enough left.
The same principle applies when washing your carpets regularly, whether this is done by hand or by machine.
Allow it to Dry
Now that your carpet has been thoroughly cleaned and treated, you may be wondering when you can begin to put your furniture back where it belongs.
It’s always a good idea to air out any carpeted areas after vacuuming (or in this case, steaming) both for safety reasons as well as for improved quality of life. It’s easy.
Simply turn on your ceiling fans to promote airflow and let the carpet dry naturally over the course of several hours.
Once the carpet feels dry and relatively odor-free, move the furniture back onto the freshly detangled surface. Now you can get up and walk around without stressing out about allergies or germs.
How to Use Hoover Carpet Cleaner
Related Guides