How to unclog heater core. It is possible for clogged heater cores to restrict the flow of warm air from an automobile’s heating system.
When you have the right tools and information, you can unclog a heater core like a plumber.
There are a few things you can do if your heater core becomes clogged.
How to unclog heater core
If a clogged heater core is disrupting your vehicle’s airflow, then it may be time to consider getting it serviced.
But before you go off and get the mechanic from your local shop to do the job for you, why not save some money and effort by doing it yourself?
While this can be a difficult process, we have provided enough information that will lead you through a step-by-step guide on how to unclog your vehicle’s heater core so that you can enjoy consistent ventilation any time of year.
Identify the heater core hoses
One of the first steps in replacing worn-out hoses is to locate both the inlet and outlet ends. On most cars, these are found on the firewall and are easy to identify once you know what you’re looking for.
Many people don’t realize that there is an actual core inside a radiator that can wear with time and must be replaced as well if you hope to get your heating system working properly again with fresh coolant flowing through.
However, it’s also possible that simply replacing hoses may solve your problems if they were the problem all along.
One way or another, we’ll help you make sure to have everything needed on hand when it comes time to install new parts.
Unplug the hoses
You may find it necessary to disconnect the hose and head under the hood once in a while.
Use your toolkit a combination of common sense, intelligence, and foresight to examine any potential problems or malfunctions.
When you see a suspicious-looking part that needs repairing, replace it right away before it gets worse or causes even bigger problems.
Similarly, if one pipe is too tight whenever you want to switch out hoses be sure to have various screwdrivers and pliers ready so you can expertly slip the pliers onto the tightened clip to unlock the hose safely before you can switch it out with ease.
Flushing the heater core
Get your heater core to unclog kit ready. Grab a garden hose, connect it to a water supply and attach a sprayer to it.
Next, flush the heater core using clean water from the hose until the dirty water no longer comes out.
Then go back to attaching the sprayer hose on the clean end and with one more rinse of clean water, you’ll be able to confirm that everything has been cleared out.
Connect the heater core hoses
You should then raise one of the hoses, get a coolant and pour it into the pipe until fluid appears. You should then reconnect the pipes.
Verify your work
Check the coolant in your radiator to ensure it isn’t too low and refill it if necessary. Start the engine and let it idle for a few moments.
Turn on both the fans and heater, keeping an eye on the temperature gauge as this allows you to monitor how hot it is getting you to want it to stay below or close to around 180°F.
When heating starts blowing out of ducts near your vents, check them periodically until they begin blowing warm air.
Can you fix a heater core without replacing it?
If your heater core leaks, you should always fix it instead of replacing it. If you fix the leak, you will not need to change the central heating system of your vehicle, which would require more time and money.
Pour-N-GO BlueDevil sealant can be used to stop the leak since it is only a small hole in your vehicle’s heating core.
Can a heater core unclog itself?
One cause of a clogged heater core is usually due to the coolant inside it freezing. However, it’s not unheard of for clogs to be caused by an outside force.
If water hasn’t been running through your radiator for some time, that could result in condensation or scale buildup eventually causing a blockage in the heater core.
If you see any at all, this means that the core may need to be replaced entirely.
How to unclog heater core
Related Guides
