How To Turn Off Water To Toilet

How To Turn Off Water To Toilet. Your toilets can and do indeed clog. The most embarrassing and time-consuming part about this problem is when you’re caught off guard without the ability to resolve it in a situation other than an actual emergency, which leaves no time to contact a certified plumber or handyman for assistance.

What might just help save the day?

Turning off the water valve! If you have no idea whether your toilet needs unclogging or otherwise, at least learn how to cut the water supply for that toilet so it can’t continue draining and causing havoc with your drainpipe. Here’s some detailed information on how.

How To Turn Off Water To Toiletturn off water to toilet

To turn off the water supply to a toilet, simply close the shut-off valve which looks like a football-shaped valve located beneath the tank. Flush your toilet, then turn the valve clockwise until it can’t be turned any further causing it to flush itself.

In this article, we explain how to turn off the toilet water.

Find The Shutoff Valve

The toilet shut-off valve is a football-shaped valve connected to the pipe or hose from the bottom of the toilet tank to the plumbing system in the wall. Some toilets may not include a shutoff valve.

Turn The Shutoff Valve Clockwise

Turning the shutoff valve completely clockwise will cut the water supply to the toilet tank. This should be a straightforward process, but if it is difficult to turn, it may be due to rusting.

It can result from a lack of maintenance but it isn’t a good indication that your need to replace the valve now. Use other methods first to ensure the water supply gets cut off efficiently.

Ensure The Water Is Off In Your Toilet

Sometimes the toilet water shutoff can be slightly faulty, and even after turning it clockwise to end it up, some water can still pass through.

If you are experiencing this issue, you should confirm if your toilet is clogged or not by doing a test flush, but if your toilet is clogged, do not flush due to the risk of blockage.

This may cause serious problems in your plumbing system, so instead of flushing try lifting the float lever up.

If the water is still on, more and more water will flow into the toilet tank after flushing. The same thing happens when you put the float lever back down and lift it up again.

That’s an indication that your shutoff valve is faulty and in need of replacement. Put your head under the bowl with both tanks separated for a few minutes to see if there’s any additional water coming from inside or underneath. Otherwise, you’ll have an overflow problem to deal with later.

Restart The Water

Here’s what you do if your toilet happens to clog or you need to fix it. First, turn the water valve off all the way at the end of the faucet all the way until it won’t go any farther.

When you flick your toilet handle, make sure everything works fine. Also, if it doesn’t work, check for obstructions in the piping system by flushing again several times.


With the water off, why is my toilet still running?

Among one of the most common causes for a running toilet is overflow water leaking down into the bowl from the tank via an overflow tube.

This happens when there’s too much water in the tank. One can adjust the water level by adjusting the height of the float.

What is the location of the shower shut off valve?

This supply valve is usually found near the bottom left side of toilet tanks. For showers/tubs, look around the tub or shower for access panels that are on the other side of the wall to where these fixtures are located.

Related Guides