How To Reset Maytag Washer

How To Reset Maytag Washer. Maytag is a household name when it comes to home appliances. Maytag commercial washers are some of the most reliable appliances made with both electrical and mechanical components available for your business needs.

If you’re having trouble with your Maytag washer not responding, you may have accidentally triggered the door-locked feature. The best way to resolve this issue is to simply reset your unit and you’ll be back in business in no time.

How To Reset Maytag Washermaytag washer

First, unplug the Maytag washer for three minutes to reset it. Reconnect it only after. In this way, all the excess water in a load of laundry can drain out before it starts moving around inside the drum again. In the event the reset doesn’t work, unplug the device again and wait ten minutes before attempting to restart your washing machine.

We will discuss how to reset a Maytag washer in this article.

Maytag Washer Reset Button

To reset your Maytag washer without a reset button, first put the washer in Stand-by Mode by pressing and holding down the Start or Pause button for three seconds. Next, leave the Start/Pause button held down for another 10 seconds.

You’ll see all of the indicator lights turn off. Carefully rotate the Cycle Selector knob clockwise and if you hear a clicking sound this means that it has successfully locked into place.

Maytag Washer Control Board Resetting

To manually reset the Maytag Washer and reset the washer control board, simply turn the power to the washer off and press Power to remove the power to the washer.

Turn the washer back on by plugging it back in. After that, lower and raise the washer lid six times within a time of twelve seconds.

Maytag washer Motor Resting

Take the plug out of the wall outlet for sixty seconds to reset your Maytag Washer or to reset the Maytag Washer motor of your Maytag Washer.

Once you have completed the reset, plug back the power cord into the wall outlet. During the next 12 seconds, lower and raise the lid on the washer six times within that time frame.

Maytag Washer Error Codes Resetting

To reset your Maytag washer and to reset and clear Maytag washer error codes, you need to first check the timer on the washer machine to make sure it’s working properly.

There is a possibility that you may receive the error code dET if there is a problem with the detergent dispenser clean out the tank and replace it, if necessary.

FAQs

Why won’t my Maytag washer start?

If your Maytag washing machine isn’t functioning, make sure that the electrical cord is connected to a live outlet. Test the outlet with another three-prong appliance.

Change the settings of the washer and pull on the konb to begin an operating cycle. If it doesn’t work, reset the circuit breaker or replace blown fuses if there are any.

Does a Maytag washer have a reset button?

Press the Delicates and Knits button for five seconds. The washer’s LCD display will flash and blink, which indicates that the error codes have been cleared and the washer has restarted.

How To Reset Maytag Washer

Related Guides

Leave a Comment