How To Remove Built In Microwave

How To Remove Built In Microwave. Finding the correct replacement and cautious removal are essential when replacing built-in microwaves.

It may appear that your built-in microwave is too firmly fitted for you to quickly remove it, but the installation was most likely done with great care.

Installation specialists may have even used spacers behind the microwave to ensure that it was flat against the walls and cabinetry.

If you acquire a new microwave with features that cater to your remodeling ideas, you may easily remove it and replace it with an improved one.

How To Remove Built In Microwave
remove built in microwave

How to remove a built-in microwave is discussed here.

1. Keep any flammables at least 10 feet away from your microwave to ensure its safety. You should also unhook the microwave from the wall outlet and turn it off.

While doing these tests, switch off the electricity to the area via your home’s junction box.

2. If you intend to mount the microwave, look for any points of attachment on the microwave or in the surrounding area.

Make a list of all the unscrewing, undoing, opening, and locking you’ll have to do to get the microwave installed.

3. Use a screwdriver to slowly and methodically remove any mountings, including spacer bars and the trim kit. Flip the microwave around and unscrew backplates.

You may want to recruit another person to help you hold up the ladder if you’re mounting an over-the-range microwave.

4. Excess cables, wires, and cords should be removed. Remove any junction boxes and power strips that are linked to them if you have more sophisticated wiring installations. If required, please refer to the handbook for instructions.

5. Once disconnected from the power and removed from its mount, you should be able to slide easily the microwave out from the cubbyholes.

If you are moving your microwave elsewhere, it’s imperative that you learn how to clean a microwave with bleach or a similar cleaning agent first.

FAQs

What is the procedure for removing a built-in microwave with the trim kit?

Make sure the tip of the blade of the putty knife is inserted behind the bottom trim piece. After carefully prying the studs out, you should be able to remove them.
With the help of a putty knife, the piece can be pulled out along the left or right side until it can be removed. Four parts will be along the perimeter; you will have to gently remove each part as you go.

Should a microwave be vented?

Microwave ovens do, in fact, require appropriate ventilation. When it comes to what they may require in terms of exterior ventilation systems and venting clearances, not all models are made alike.

It’s critical that the bottom of your new model has adequate openings and that they aren’t obstructed in any way so that hot air can readily escape from within the oven while cooking.

The basic guideline is that the more powerful your model grows, the larger the holes and vents will be necessary for safety reasons since this will assist lessen the risk of fire caused by insufficient venting.

Related Guides

Leave a Comment