How to Program a White Rodgers Thermostat. A White Rodgers thermostat can be a saving grace no matter what time of year it is. In fact, during winter and summer when temperatures in the U.S.
Tend to rise or fall dramatically, an advanced thermostat from White Rodgers will help you keep your home’s comfort level reasonable so that you don’t need to worry about paying high energy bills.
One of the most trusted brand names for thermostats in the country, White Rodgers offers advanced models of both basic and touchscreen models that are easy to program and schedule according to your weekly routine.
How to Program a White Rodgers Thermostat
Whenever you install the White Rodgers thermostats in your house, you’ll find that programming them is a simple yet very efficient process.
The system offered by White Rodgers itself provides access to other manufacturers of thermostats using the internet protocol on its own website.
There are several language packs, and thus one can choose his/her temp based on their native language.
The manufacturer has designed these digital thermostats so well that they allow sensing remote devices like gas logs which are normally handled by a different brand of thermostat,
or the ones for electric baseboard heating or steam heat systems.
Initiation by time and day
It is necessary to accomplish the following steps after installing a White Rodgers Brand thermostat in order for it to function correctly. The first thing you need to do is set the time and day using the 24-hour button.
Using this method, the time can be displayed numerically and with AM/PM settings. Then, select the correct weekday for your device. A GPS-enabled thermostat can be purchased from White Rodgers.
By reading the user’s current GPS location, the application should be able to automatically adjust the temperature and forecast in accordance with their current location once this step has been completed.
Selecting a thermostat mode
To access one of the working modes in the White Rodgers thermostat, you must use the corresponding slider switch.
For example, to access the cooling mode, you will slide it to the left and a flame icon will appear on the screen.
However, if you slide it to the right and a snowflake icon appears this indicates the heating mode.
To decide what temperature settings to program for a certain mode, first decide which Mode is best for you.
Setting up the program
The user can set the desired temperature for weekdays and weekends by pressing the “PRGM” button.
White Rodgers thermostats can be programmed only for weekdays and weekends, unlike Braeburn programmable thermostats.
Temperature setting
A thermostat controller is programmed to work at times of the day. There are four-time slots that can be set for specific weekdays and weekends,
with up to two days a week each being programmable with different temperatures for each weekday.
The “PRGM” button will save the settings and move on to the next time slot. The user can increase or decrease the temperature setting using the up and down buttons, where an increase will add 5°F to 15°F.
After changing to a new time slot, pressing on “PRGM” again will save that time slot’s settings and do the same for all time slots on subsequent screens.
On the highest temperature setting, steam heat shows in a green typeface as opposed to red text when lower settings have been set beforehand to conserve energy by lowering temperatures during cooler days or night hours.
Start the program
Ease of Use. The ability to program up to 84 configurations a day, times 7 days a week with the help of the 4-button control allows you plenty of customization. A simple press of the button will put your Thermostat into function.
How to Program a White Rodgers Thermostat
Related Guides
