How to get a Rug to lay flat on Carpet. If you’re trying to get a rug to lay flat on the carpet, sometimes all you need to do is wait and it will fall into place naturally.
If not, however, you can try using weighted objects for example some books or even unopened cans of food that can make the corner flatten out.
You can also run an iron over the edges of your up-rolled carpet if you have one around this should flatten them right away. If even these tricks haven’t done the job, you may have too heavy of a rug on top of your carpet.
Check with someone at your local home improvement store who might have suggestions like double-sided tape or weights intended to help large rugs stay in place on carpets and vacuum suction cups that look like large Googles and act as attachments that are designed specifically to keep rugs lying flat.
How to get a rug to lay flat on Carpet
With a few simple ideas, you’re sure to find one that works for your home, even if keeping throw rugs flat on carpet can be difficult.
Rug Edges should be Taped
Apply carpet tape around the edges of the rug. Turn over the rug with the wrong side facing up. Cut the carpet tape to length so it can cover each edge of the rug.
Apply a length of tape starting from a back corner then lay on top of it, then apply another length of tape and overlap it onto the first piece by 1 inch (2.5cm – 2cm is recommended).
Then do that for all 4 corners, making sure you pull down firmly on the excess backing after applying each piece and work forwards in small strips towards the front until you have finished covering all sides.
Silicone Glue is Recommended
Using silicone glue, turn the rug upside down. Place dots of the silicone glue around the edges of the rug. If necessary, for a large rug you can place dots of the silicone directly in the middle as well.
Placing Carpet Edges under Furniture
Place the corners of a rug under furniture legs to hold it in place. This works best for larger rugs, particularly ones that should be placed on top of hardwood or tile floors.
Remove the Gripper Pad
Cut the gripper pad to fit the width of your rug. Tape it to your carpet. Measure out half an inch from any corner/edge, and then cut each of those sides.
Slide the gripper pad back over that corner of the rug, and then lay the rug on top of it so that there’s a smooth underlay where you’ve trimmed it.
Run a rolling pin over all four corners, making sure to keep equal pressure from the left to right as you roll forward.
Rug Flat on Carpet
Use a Rug Pad. Using an anti-slip rug pad is one of the most effective ways to keep your rug from sliding around and contorting on your flooring.
Caulk Inexpensive Rugs. If your rug does not have an edge, you can still prevent it from bunching up or rolling about on the carpet by placing it over a piece of double-sided tape beforehand.
Anchor The Rug With Furniture. You can even use furniture to hold down certain areas of rugs or carpets; for instance, if you want to place it along the inside of each leg of your coffee table, couch, or chair.
Is putting a rug on the Carpet OK?
Area rugs or tapis (or Persian carpets if you don’t want to call them “rugs”) are a great option for decorating your home and giving it a fresh, new look.
But what kind of carpet do you need to use with an area rug? The answer is that the two don’t necessarily have to complement each other.
Most area rugs are round rather than rectangular, so they can easily be placed over almost any type of carpeting and continue looking good in your home.
However, there is one type of carpeting that will never work well with an area rug, and this is frieze-style carpeting.
Technically speaking, frieze-style carpets are not even carpet at all they’re actually more like extra-thick carpeting than anything else.
Why is my rug not laying flat?
There are a lot of ways to make sure that your rug doesn’t become a tripping hazard ever again. First, it’s best to let the edges of your carpet get wet as a way for them to flatten out better.
If this does not work you can try taking a flat iron to the problem area which should solve it in no time.
Be sure to use an iron-on wool setting because the heat from a regular setting will damage the weave of this material.
How to get a Rug to lay flat on Carpet
Related Guides