How To Fix Water Damaged Swollen Wood Floor

How To Fix Water Damaged Swollen Wood Floor. Your hardwood floor’s worst enemy is water. If water is allowed to get into the wood, it will rot, stink, swell, discolor, and distort it, as well as leave mold below or between the boards.

Water damage may be avoided by always mopping up spills and avoiding them from spreading on your flooring.

If your floor has been damaged by water, there are several things you can do to enhance its appearance and feel yourself, or you may hire a professional business to do it for you.

How To Fix Water Damaged Swollen Wood Floor

how to fix water damaged swollen wood floor

We will discuss how to fix a swollen wood floor that has been damaged by water.

Select Damage Area And Cut It

To begin, use a marking instrument such as a grease pencil or chalk to trace the outline of a square immediately around the cracked or damaged region.

Keep your lines as clean and even as possible by using a ruler or straight edge. Cut through the line you just created with the circular saw set to the depth it was designed for.

Using Pry Bar, Chisel, And Hammer

Gently tap along the edges of the board with the flat end of a hammer until it fractures. Remove the damaged board by tapping around the edges with a pry bar or chisel and hammer to get it started.

You may also break cutting kerfs at the cross-ends, cut’s allowing you to remove the damaged board with less power and have greater control over where it is taken from.

Using Towel

Blot up any extra wet with towels and vacuum the area to help evaporate any lingering water.

Then, to speed up the process of drying out certain portions of your property that have been flooded, position a huge electric fan in the area.

Using Floor Scraper

Use a scraping tool to remove the sticky glue from your subfloor if your hardwood flooring employs adhesive and you’re having trouble removing it. A forward-downward motion can be used to accomplish this.

Fitting New Board

fitting new board

First, make sure the board is the appropriate size by measuring it.

After that, carefully lay the new board in its proper placement and cut each side with a saw until it fits perfectly.

Use an adhesive to adhere the new flooring to the old one, or a hammer and nails if you’re working with smaller regions.

To keep gaps between the pieces to a minimum, use pieces that are around the same size as your original boards.

You may nail in two rows of boards in bigger places, then put glue on top of them to finalize your repairs.

Placing Heavyweight On Board

You should place a heavyweight on the board for at least 45 minutes when using adhesive. In this way, the board will be able to stay level while the glue is drying.

FAQs

Can wood floors that have been damaged by water be repaired?

The best solution for many damaged wood floors is to replace and remove the defective boards, as well as refinish the entire floor.

When replacing planks on a wood floor, it’s important to keep track of which ones need to be replaced.

You must also evaluate whether or not any fasteners will need to be changed in addition to the wood. Finally, changing a board may appear simple.

Hardwood floors that are warped can be repaired?

When your hardwood flooring is buckled, you may not require extensive improvements.

When clients contact us, it’s often for a simple service, such as draining excess moisture from the flooring to assist solve an issue.

However, if your hardwood floors are severely buckling, you may need to replace part or all of the boards.

How To Fix Water Damaged Swollen Wood Floor

Related Guides

Leave a Comment