How To Clean Refrigerator Water Dispenser. Have you ever wondered if the water that comes out of your refrigerator’s water dispenser is clean? It’s better to treat water from unfamiliar sources because there might be bacteria or impurities in the water.
Your refrigerator’s water supply or dispenser may not have been cleaned in ages. In this case, it will help to clean this system – so here are some steps:
How To Clean Refrigerator Water Dispenser
Clean the visible surfaces with a soft sponge or cloth soaked in vinegar and water.
Also, you can spray a mixture of water and vinegar onto the water dispenser tap and other exterior parts and wipe them with a damp cloth.
Clean the dispenser’s surfaces with a clean cloth to remove any vinegar residue. How to clean the refrigerator water dispenser is discussed here.
Remove The Water Supply
You must turn off the water supply before you can begin cleaning the dispenser. Ideally, your refrigerator and cold water should be connected by a valve, so if one doesn’t work, then the other might as well, so first resolve the most likely problem.
Turn the valve off and loosen the screw that connects the valve to your water line leading to the water reservoir. Once you remove the screw, you can pour vinegar into it leading to the water reservoir.
Pour Vinegar White
Once you have disconnected the water supply to the dispenser, let plain white vinegar stand until there are at least 2 cups of it in the hosepipe connected to the water reservoir.
The reason we suggest letting it stand for a good amount of time before rinsing is because this method will ensure maximum dissolving of dirt, debris, and grime on contact so that you don’t have to rub or scrub anything off later down the line.
Draining Vinegar
When the five minutes have expired, drain the water by filling the tube with water. The water will flush out whatever vinegar smell might be lingering in the reservoir as well as any vinegar taste left behind.
Remove the tape at the other end of the tube and place 3-4 cups of water through it to rinse out thoroughly.
Clean The Nozzle Gently
Once complete, the next question would be how to clean the nozzle. We highly recommend using a toothbrush for this because it will most likely be the only thing that will fit in all of the places that need attention and will also allow you to get rid of all of the ingrained dirt and grime.
Be gentle and be thorough as we want to make sure everything is properly rinsed out so there are no contaminants or other harmful residue left behind and causing a buildup inside the tube especially in hard-to-reach areas.
Reconnecting Water Supply
It’s important that you thoroughly clean all the internal components of your appliance as part of the usual maintenance routine.
If you’re completely sure that you’ve washed off any vinegar residue, then you can now reconnect the water supply. Put the screw back in and screw it tightly on to make sure that no water leaks from there.
Turn on the valve again to let the water flow once more. You could also run clean water through it just to make sure you don’t have any vinegar left behind.
Exterior Cleaning
Most people usually care about cleaning the inside instead of the outside. If you don’t clean the outside, dirt will find its way inside.
Clean the unit with vinegar and water whether it’s detachable or not. It’s an effective way to wash away harmful bacteria and make things easier for you or someone else who’ll be taking over maintenance in the future.
Wipe all your unit’s exterior surfaces with vinegar. Rinse all these surfaces with clean water after wiping them down with vinegar. Please let your detachable dispenser air dry before reattaching.
Clean The Tray
The final part to clean is the baking tray. If your tray detaches, remove it and wash it in the sink with soap and clean running water.
Use a sponge to clean all of its parts including corners. Leave to dry before attaching it to your oven again. If your tray has grime on the corners, use vinegar to eliminate this.
How To Clean Refrigerator Water Dispenser
Related Guides